News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Head Gaskets  (Read 745 times)

    Offline gafletch

    • Jr. Member
    • **
    • Posts: 236
    Head Gaskets
    « on: March 23, 2014 - 08:36:59 PM »
     :clueless:  Hi guys,  for a 440  that's .040 over, what do I look for in a good head gasket?  Do they come in a size for the bigger bore?  Thanks.
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Head Gaskets
    « Reply #1 on: March 23, 2014 - 08:39:47 PM »
    some do , most do not come is specific bore sizes  , what heads are you using , what is the compression ratio , is quench a factor ?
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: Head Gaskets
    « Reply #2 on: March 24, 2014 - 04:44:37 AM »
    I'm 40 over on my 496 and Fel-Pro had the right size.
    Been running great for 14 years.
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline gafletch

    • Jr. Member
    • **
    • Posts: 236
    Re: Head Gaskets
    « Reply #3 on: April 11, 2014 - 03:58:53 PM »
    Going with Felpro 1009 gaskets that have o-rings, ARP head bolts , copper exhaust gaskets on Doug's Headers, New polished aluminum valve covers I'm sealing with hi-temp clear. Current cr is 10.5/1.
     Hopefully my quench will be correct. Edelbrock tech said should be good swap. Thanks for the input!
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Head Gaskets
    « Reply #4 on: April 11, 2014 - 04:15:43 PM »
    If you are using Alum heads I would use Cometic gaskets , so you have expansion capabilities without tearing the gasket fibers
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline gafletch

    • Jr. Member
    • **
    • Posts: 236
    Re: Head Gaskets
    « Reply #5 on: April 11, 2014 - 04:29:15 PM »
    Neal, I already bought the 1009's so I guess I'll go with them. That's what Edelbrock recommends. Hope they're ok. Thanks!
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Head Gaskets
    « Reply #6 on: April 11, 2014 - 08:49:50 PM »
    They will fail over time how long depends , alum expands at 2x the rate of iron so the gaskets are constantly pulled as they expand & contract .if it is in the cold climate over winter & started in cold weather it will fail faster
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »