Where to start?

Author Topic: Where to start?  (Read 874 times)

Offline Blasterb

  • Jr. Member
  • **
  • Posts: 134
Where to start?
« on: July 14, 2014 - 08:38:03 PM »
I just became the guardian of a 1970 Dodge challenger Western Sport Special. The interior is pretty much gutted and I'm trying to figure out where to start. Rest of the car is pretty much done. Seats are crap, everything is disassembled. Any suggestions would be greatly appreciated. I'll post pics soon.




Offline dave73chally

  • Sr. Member
  • ****
  • Posts: 1304
Re: Where to start?
« Reply #1 on: July 14, 2014 - 09:12:47 PM »
Figure out what you have and what you need. Post up some pictures and guys will chime in and help out.

As far as parts go, contact Dave @ Roseville moparts he's a club sponsor and will have most everything you need. Dales cuda shop is also a good source for oddball parts. Upholstery you'll most likely get the suggestion to use Legendary auto interiors, they seem like the best quality fit and price, they are who I'll be using. That's a start, there's many others that know a heck of a lot more...
73 Challenger
512 / 4spd / Hotchkis & QA1 Suspension

Offline don340-4

  • Jr. Member
  • **
  • Posts: 225
Re: Where to start?
« Reply #2 on: July 14, 2014 - 11:25:02 PM »

 Western Sport Special, gottta love it, only around 1100 built.  :bigsmile:

     :wavingflag:         Phoenix Graphics for your Western Sport Special tail panel decals best reproductions I have seen.
Don
1970 Challenger R/T SE
1970 Challenger Western Sport Special
1969 Plymouth Road Runner
2012 Ram 1500 R/T

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Where to start?
« Reply #3 on: July 14, 2014 - 11:50:26 PM »
I have a black rear interior panel from one of those.
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Where to start?
« Reply #4 on: July 15, 2014 - 10:41:44 PM »
As stated, asses what you have and place them into categories, such as what can be used as is, what can be rebuilt/refurbished and what needs to be replaced and or purchased.

As with most projects, it helps if you gather everything you need before you dive in.  If that’s not feasible or finically obtainable, start with what you need the most so you can enjoy the car while gathering the rest of the parts.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Blasterb

  • Jr. Member
  • **
  • Posts: 134
Re: Where to start?
« Reply #5 on: July 23, 2014 - 12:37:52 PM »
Thanks for the advice. Trying to post some pics but the files must be too big. I'm going to start by putting the dash back together and getting the wiring back into working order. My first job I ran into a slight snag. You would think hooking up the wiper motor switch connectors would be pretty straight forward. NOT! The connectors dont seem to line up how you would think. Back to the parts manuals! I can see that I'm going to be asking a lot of questions especially because I didn't take the thing apart.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Where to start?
« Reply #6 on: July 23, 2014 - 05:55:17 PM »
I would start with the pedals & interior insulation , the heater box & dash , window goes in last 

Challenger - You`ll wish You Hadn`t