News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Tremec and a Hemi question  (Read 1947 times)

    Offline GreenFish

    • Sr. Member
    • ****
    • Posts: 1281
    Tremec and a Hemi question
    « on: July 10, 2014 - 12:35:47 PM »
    I have a TKO600 in my cuda attached to a 440 RB.  If I wanted to eventually put a 3G Hemi in my cuda, Could I use my tremec? Just getting a new bell housing/clutch?
    Logged
    70 cuda, 440, KB pistons, 10.5:1 compression, edlebrock heads,RacerBrown cam, 5-Speed Tremec, Megasquirt EFI


    Offline johns cuda shop

    • 71 Cuda Pro-Touring Build
    • Sr. Member
    • ****
    • Posts: 1205
    • Machinist and Fabricator
      • Custom Machine Components
    Re: Tremec and a Hemi question
    « Reply #1 on: July 10, 2014 - 01:33:05 PM »
    Hi, I don't see why not, The TKO 600 should be fine unless your pulling some serious torque out of the hemi. All you need is the belhousing which the gen 3 hemi and the small block share the same bolt pattern,   :bigsmile:
    Logged
    71 Cuda Gen III Aluminum 426 Hemi T56 6 speed 4.10 8.75 Modified & Lowered RMS coilover suspension Wilwood discs

    Offline GreenFish

    • Sr. Member
    • ****
    • Posts: 1281
    Re: Tremec and a Hemi question
    « Reply #2 on: July 10, 2014 - 09:42:13 PM »
    Thanks, that's what I figured, just didnt know if the input shaft was different
    Logged
    70 cuda, 440, KB pistons, 10.5:1 compression, edlebrock heads,RacerBrown cam, 5-Speed Tremec, Megasquirt EFI
    Pages: [1]
    « previous next »