News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Collapsed Steering Shaft  (Read 541 times)

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Collapsed Steering Shaft
    « on: July 17, 2014 - 10:25:49 PM »
    Any thoughts on the best way to repair a collapsed steering shaft.

    The column is out of the car and the shaft is fully accessible.

    I have seen posts about the Mopar repair kit, but I am pretty sure that is no longer available.

    Thanks,

    Jason
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!


    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: Collapsed Steering Shaft
    « Reply #1 on: July 17, 2014 - 10:35:58 PM »
    When installed, it really doesn't matter. The two pieces are 'captured' by the coupler and the outer sleeve of the steering shaft. A friend of mine used plastic screws in the holes to hold it while installing.  :2cents:
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline jimynick

    • Resident
    • *****
    • Posts: 4512
    Re: Collapsed Steering Shaft
    « Reply #2 on: July 17, 2014 - 11:06:54 PM »
    Quote from: dodj on July 17, 2014 - 10:35:58 PM
    When installed, it really doesn't matter. The two pieces are 'captured' by the coupler and the outer sleeve of the steering shaft. A friend of mine used plastic screws in the holes to hold it while installing.  :2cents:
    :iagree:  Yep, the whole idea was to allow the shaft to collapse, but not just slide in and out and those plastic screws would probably work just fine. DON'T use metal, as that defeats the purpose.  :thumbsup:
    Logged
    Pages: [1]
    « previous next »