Gas tank parts list?

[shoooter]

Does anyone have a parts list and numbers for a gas tank install on a 71 cuda with a er8e tank? What filler neck is used? Is there a grommet at both ends? I see some people use a gas tank pad that goes between the tank and floor? gas tank strap pads as well? What sending unit?. I want to order everything at once.. Also who sells premade fuel lines or do you make your own? thanks again everyone

[anlauto]

> Gas Tank w/four tubes on passenger side
> Gas Tank Vent Tube - Mounts in trunk
> Gas Tank Filler Neck
> Fuel Sending Unit - size depends on engine 318-383 use 5/16, 440+6-Hemi use 5/8 with 1/4 return
> Fuel Line Ground Strap
> Fuel Lines -Best are made by Fine Lines Inc
> Fuel Tank Pad - Performance Car Graphics
> Gas Tank Straps
> Gas Tank J bolts
> Fuel Neck-Tank Seal
> Fuel Neck to Floor Seal
> Fuel Neck- Body Foam Seal
> Gas Cap

[Chryco Psycho]

Talk to Dave @ Roseville
 I have not seen repro filler necks or vent tubes

[anlauto]

Talk to Dave @ Roseville
 I have not seen repro filler necks or vent tubes

Filler necks YES, vent tubes NO

[CudamanTom]

Filler necks YES, vent tubes NO

You might find a used vent tube on ebay or somewhere (not very often though) but make sure none of the lines are clogged. They are a bear to clean and get uclogged depending how bad it is.

[dfrazz]

I have a original vent tube off my '71 Chally.  Not sure if it is the same as the Cuda.

[CudamanTom]

I have a original vent tube off my '71 Chally.  Not sure if it is the same as the Cuda.

Nope, totally different.

[anlauto]

I have a original vent tube off my '71 Chally.  Not sure if it is the same as the Cuda.

Yes EXACTLY the same.

[CudamanTom]

Yes EXACTLY the same.

Oops, I got that wrong. Sorry. 

I was thinking filler neck. My bad.

[dfrazz]

Shooter - send me a PM if you are interested in my vent tube.

[6771plymouth]

I bought a vent tube at carslile  do I really need?

[dfrazz]

I bought a vent tube at carslile  do I really need?

I pulled mine when I installed my new trunk floor and am just running a correctly vented cap.  I tied off the 4 valves at the bottom of the tank.  No issues.