Manual windshield washer pump mounting location

[Blasterb]

I'm looking for a picture of a mounted manually operated windshield washer pump. I searched the site and came up empty.  Any help would be greatly appreciated.

[Code3]

Me too

[shoooter]

We're they floot mounted?

[HemiTunis]

Yep, they were.

I have one in my 70 'Cuda. Can see if I can snap some photos of it this weekend.

[burdar]

There is a mounting location stamped into the firewall with two screw holes.  My car has electric washers but the screws for a manual pump were still installed in the firewall.  My guess is that all cars had those screws installed.  Here is a pic...

[Rickster]

Here's a pic of mine in a 71 Challenger. I can post a closer shot if needed.

[shoooter]

Ok mine is a manual pump! Cool. I will get picks once my car is back.

[6771plymouth]

and what hole in the fire wall do the lines run

[anlauto]

Large hole about 6 inches above the two screws in burdar's picture

[Blasterb]

Thanks for the pics. Somebody mounted the high beam switch where it goes. You guys are the greatest!

[oldskoolboarder]

Holy smokes, I think you just answered my question before I even had a chance to post it.

My 68 Cuda (purchased 3 weeks ago) has 2 switches on the floor.  The lower one is the dimmer, which has to be fixed but that's another story.  There's an upper switch that has more rubber around it.  I tapped it a few times and it 'felt' like it was pumping something.  Is this the manual washer pump?

I didn't see hoses leading to any washer nozzle on the hood.  Does anyone have pix of what that might look like?  I don't know what the original set up is supposed to look like, let alone how to get everything working again.

[burdar]

Yes, that is your manual washer pump.  Your A-body doesn't have squirters on the hood.  They are in the cowl and squirt through the slots.

['Cuda Hunter]

['Cuda Hunter]

['Cuda Hunter]

hope those help