71 look alike or clone

[sassygreen]

New poster, long time lurker. Here are some of my build pictures for your amusement. I will try to start from the beginning which was about this time last year. Hope you enjoy.

[Topcat]

Looking forward to your progress.

Wow! One of the most rusted quarters I've seen!

[1 Wild R/T]

Looking forward to your progress.

Wow! One of the most rusted quarters I've seen!

Obviously never lived in Chicago... Or anywhere else in the mid west...

Good Luck with your project!

[sassygreen]

yup that is the concrete showing thru the floor board.

[sassygreen]

 looking at the parts pile. Trying to come up with a plan.

[anlauto]

Step One is strip the car 100% and have it sand blasted to find ALL the rust.

[sassygreen]

Lets chop out the bottom of the car

[sassygreen]

Here it is laying on the ground

[MrForce]

Lots of room for the mini tubs, 4 link, and coilovers...

[dodj]

Wow! One of the most rusted quarters I've seen!

Says the guy from California!!

You are spoiled Mike.
 

[sassygreen]

Made a rotisserie from two harbor freight engine pullers some square stock and uni-strut.

[DAYLEY/CHALLENGER]

Wow.............This will be interesting to follow..............

[sassygreen]

there was a bit of a gap in the picture taking. Here is the car with quarters tacked on. Rear frame rails where welded on to the new floor leveled and squared. The quarters where then aligned with existing roof and Dutchman panel and door.

[sassygreen]

The shock mount cross brace, green paint, was just about the only salvageable part on the back of the car.

[Topcat]

Good progress.

And what a huge shop!
A small plane could fit in there.