Anybody using FF torsion bars

[roadman5312]

Pro's, con's, ? Thinking about using there 1.06 bar on the 70 Challenger Hemi.

[CUDA JAS]

I hear lots of good things about FF.

I have 1 inch Just Suspension bars in mine and they work fine.  I think you will be happy with the 1.06s.

I think good shocks are the key.

Jason

[brads70]

I have 1.120"  from FF  quality stuff! 

[cudazappa]

1.18 Firm Feels with my aluminum headed 360!  Love them!  I also ran the 1" just suspensions and they were a huge improvement over stock, clocking of those meant some finagling down there but nothing major, just mechanical adjustment.  My Mopar Performance 1.22" bars, have that issue, too.  Still sitting in their opened NOS box, though.

[BIGSHCLUNK]

I have 1.120"  from FF  quality stuff! 

  same here! 

[Topcat]

I have 1.20 bars from PST.

That might've been overkill but the Hemi weighs alot.
It actually handles pretty good with them.

[soundcontrol]

You guys use heavy T-bars, I was recommended 1" from FF, that what I got, not in the car yet though. 340 engine. Did I get them too soft? Not gonna race or anything, just cruise, but I want good stuff...

[GoodysGotaCuda]

You guys use heavy T-bars, I was recommended 1" from FF, that what I got, not in the car yet though. 340 engine. Did I get them too soft? Not gonna race or anything, just cruise, but I want good stuff...

That sounds about right for a SB cruiser. 

[roadman5312]

Thanks for the feedback guys  Going to call FF tomorrow see which size they recommend.

[brads70]

That sounds about right for a SB cruiser. 

x2 if your building a cruiser that's fine.

[dodj]

That sounds about right for a SB cruiser. 

x3
Remember, Brad and Bigs are running big blocks and cudazappa is an auto-x'er.

[BIGSHCLUNK]

x3
Remember, Brad and Bigs are running big blocks and cudazappa is an auto-x'er.

   elephants are heavy... 

[cudazappa]

I have 1.20 bars from PST.

That might've been overkill but the Hemi weighs alot.
It actually handles pretty good with them.

Are you sure that's right?  Was just on their website, biggest they offer is a 1.03" there...

[Topcat]

Are you sure that's right?  Was just on their website, biggest they offer is a 1.03" there...

I bought them years ago. 1.20 stamped on the end.
I'm pretty certain I bought them PST.

[cudazappa]

x2 if your building a cruiser that's fine.

x3  Had that with my all iron 318 and aluminum head 360 and they are light years better than stock.