News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Shaker to hood rubber seal  (Read 3185 times)

    Offline Racer57

    • Sr. Member
    • ****
    • Posts: 1489
    Shaker to hood rubber seal
    « on: October 29, 2014 - 10:44:59 AM »
    This is what mine looks like after I took off the duct tape. Should a good seals ends fit closer together and is there something that's suppose to hold them together ?
    Logged


    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Shaker to hood rubber seal
    « Reply #1 on: October 29, 2014 - 11:12:43 AM »
    It comes as one piece . . . it appears that the seal where the two ends came together failed at one point and someone decided duct tape was the answer.   :dunno:
    Logged

    Offline 4 speed fish

    • Full Member
    • ***
    • Posts: 849
    Re: Shaker to hood rubber seal
    « Reply #2 on: October 29, 2014 - 12:03:50 PM »
    A friend of mine came up with a fix after I cut my seal a little short.Get a piece of rubber hose,insert the hose after gluing it into the open slot of the seal.Then glue the remaining edges and  secure with a big binder clip.Use 2 clips 1 where the hose is and the other where you join the seal.Use blue tape on the seal when you put the glue on so you don't get glue all over.
    Logged

    Offline 1 Wild R/T

    • Resident
    • *****
    • Posts: 4594
    Re: Shaker to hood rubber seal
    « Reply #3 on: October 30, 2014 - 01:02:57 AM »
    Quote from: 4Cruizn on October 29, 2014 - 11:12:43 AM
    It comes as one piece . . . it appears that the seal where the two ends came together failed at one point and someone decided duct tape was the answer.   :dunno:

    I think black duct tape was original... I saw plenty of cars with it back in the mid 70's...  A12 cars, T/A's & AAR's & Shaker cars.. All had a taped seam on the seal... And when you bought a new seal through Chrysler it wasn't one piece, it was supplied long & you cut it to fit...
    « Last Edit: October 30, 2014 - 01:04:56 AM by 1 Wild R/T »
    Logged
    JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
    WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
    RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
    5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

    Offline 72ls5fla

    • Jr. Member
    • **
    • Posts: 306
    Re: Shaker to hood rubber seal
    « Reply #4 on: November 19, 2014 - 03:51:27 PM »
    my very original 22500 mile shaker car has the tape too.
    the ends are glued together with 3M weatherstrip glue.
    Logged

    Offline 73plymouth

    • Jr. Member
    • **
    • Posts: 32
    Re: Shaker to hood rubber seal
    « Reply #5 on: November 19, 2014 - 08:48:06 PM »
    « Last Edit: November 19, 2014 - 08:50:32 PM by 73plymouth »
    Logged

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: Shaker to hood rubber seal
    « Reply #6 on: November 19, 2014 - 11:54:13 PM »
    I bought a seal for my 6 barrel base from this guy recommended from Dave at Roseville.  The seal is perfect 1 thick piece.

    www.shakerhood.com/products.php?id=ShakerComponents
    Logged

    Offline schtick

    • Jr. Member
    • **
    • Posts: 73
    Re: Shaker to hood rubber seal
    « Reply #7 on: November 25, 2014 - 07:25:15 PM »
    I have the same one. This is how I made sure it would stay on the base after gluing.
    Logged

    Offline schtick

    • Jr. Member
    • **
    • Posts: 73
    Re: Shaker to hood rubber seal
    « Reply #8 on: November 25, 2014 - 07:27:14 PM »
    Quote from: schtick on November 25, 2014 - 07:25:15 PM
    I have the same one. This is how I made sure it would stay on the base after gluing.

    Logged

    Offline Racer57

    • Sr. Member
    • ****
    • Posts: 1489
    Re: Shaker to hood rubber seal
    « Reply #9 on: January 25, 2015 - 10:06:13 AM »
    I ordered this from Dales Cuda.........   http://www.dalescudashop.com/19eshse.html

    But I got one that has ends. Did they send the wrong one or is the pic misleading ?
    Logged

    Offline CudamanTom

    • Resident
    • *****
    • Posts: 2670
    Re: Shaker to hood rubber seal
    « Reply #10 on: January 25, 2015 - 10:23:48 AM »
    Sounds like you got one that separated at the seam. It should look like the pic on that link you provided.
    Logged
    1971 Cuda Vert 440-833 - (clone)
    1971 Cuda 440-727 - (clone)


    Because I like it fast!!!
    Pages: [1]
    « previous next »