73 bumper brackets wanted

[crash340]

Hi Team, I'm looking for a set of 73 front and rear bumper brackets, I want to use the factory bumpers and pull them in to match a 72 style, I don't want to drill nee holes in bumper etc, just mod a set of brackets.
thanks
G

[anlauto]

Cuda or Challenger ?

[crash340]

That little bit right there will help,,,,,, Cuda, thanks Alan.

Also looking for a pair of 72 bumperettes and fillers for the rear valance, can be used but not pitted please.

[anlauto]

Too bad you're half way around the world...It would cost a fortune to ship brackets.

[crash340]

Only need them shipped to TN, I'll be back there in Jan

[dougs bs23]

I have a pair or rear brackets from a 74 cuda.   Don't know it theyre the same as a 73.  You'd need to modify them to tuck the bumper in.

[crash340]

Thanks Doug, I believe they are different, I specifically am chasing the 73's so as the bolt paterns remain the same, I just have to cut, re bend a little and re weld and direct bolt in etc.

Greg

[anlauto]

I have both front and rear bumpers/brackets complete from a 1973 Cuda. I would gladly sell you the six brackets (4 front 2 rear) that you need however I think it would cost a small fortune to mail them from Canada, even to TN.  Most likely more money then  I would need for the brackets

[crash340]

Thanks Alan,

USPS have flat rate boxes I use often, you can fit as much as you can in the box provided it does not exceed 20Lb and its $81.00 to ship it to Aust, only problem is, I think those front brackets are too long to fit in the box, the rears no problems. Im not sure if Canada have similar.

Greg

[brotow]

I have the front and rears from a 74 chall. I don't know if they would work for you.  N.Y. 11756

[crash340]

Can someone confirm that I'm right in thinking the 74 cuda brackets are different to the 73 please?

Alan, could you possibly look into a shipping cost to Chattanooga TN please? My daughter is flying out on Dec 14 and can bring them with her. Also chasing a gas, temp and maybe an amp gauge, they don't have to work as I'm primarily after the gauge front to do a gauge conversion etc

[crash340]

Anyone??? Alan?

[anlauto]

Mine are still bolted to the bumpers. I really don't feel like taking them all apart, finding a box heavy duty enough, pack them up only to find out it's $80+ to ship them to TN.......It's just not worth it...there has to be some closer to you.

[crash340]

Thanks Alan, no problems, I have some guys out in WA who will be able to help out, sadly they are a rare item out here and was happy to pay double that to have them sent to TN.

[crash340]

Bump, still looking for these if anyone has them, need them shipped to TN, I'm certain 73 is a stand alone year, 74 brackets are slightly different I thnk ,