new pics of 4 door cuda

Author Topic: new pics of 4 door cuda  (Read 44379 times)

Offline resq302

  • Sr. Member
  • ****
  • Posts: 1114
new pics of 4 door cuda
« on: November 05, 2014 - 11:40:35 PM »
Figured I would pass this along on this site since this is where this car started originally.  Looks like Dave has made some really good progress on the car since the initial thread was posted on here.  I came across these pics on another forum and wanted to share it with the rest of the cuda/challenger board.  Say what you will, the car is turning out absolutely amazing, I think!  While the initial pics of the car were a work in progress (some even called it a bubble roof or a raised roof), the current car looks, what I would imagine if I didn't know any better, like a car that would have been a production car.  (Again, if I never knew that the cudas and challengers were limited to only 2 door cars).  The work that Dave and his crew have done to this car, essentially building their very own car with no instruction manual, is absolutely mind boggling to say the least.  I have done a custom body on a Jeep CJ-7 that I used to own and would NEVER undertake anything like that again and that was no where near what the lengths that Dave and his crew are going to with this car.
The result is going to be an amazing tribute to what this original prototype was! I can't believe the difference in what the initial picture looked like compared to what the roof looks like now, (just like Dave had initially said it would be like). Like I said, if I didn't know any better, I'd swear that this car would have been a production car (if I didn't know that they never made 4 door challenger or cuda).

Anyway, here are the pics below:

Before:





Current pics:
















Offline E-Body Products

  • E-Body Products
  • Sr. Member
  • ****
  • Posts: 1016
  • American Jobs Are Our Children's Future!
    • E-BODY PRODUCTS
Re: new pics of 4 door cuda
« Reply #1 on: November 06, 2014 - 05:19:25 AM »
Great work!!


E-Body Products
www.ebodyproducts.com
606-481-9014

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: new pics of 4 door cuda
« Reply #2 on: November 06, 2014 - 09:02:15 AM »
Thanks for posting the pics up here. 

That's a pretty cool cuda.
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline widing'cuda

  • Full Member
  • ***
  • Posts: 586
  • 70 'cuda383 - BS23N0E
    • w i d i n g ' c u d a
Re: new pics of 4 door cuda
« Reply #3 on: November 06, 2014 - 04:38:01 PM »
 :iagree:

- Jørgen - Norwegian Mopar fanatic

1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
http://cuda.widing.biz/

Offline AARuFAST

  • AARuFAST
  • Resident
  • *****
  • Posts: 2154
Re: new pics of 4 door cuda
« Reply #4 on: November 06, 2014 - 09:28:29 PM »
I was wondering what happened to this project.
Thanks for update.   
I guess Dave got no interest here and went somewhere else,
1970 AAR Cuda
1970 Gran Coupe Ragtop. 1 of 66
Gran Cpe Convertible 1 yr only.

" I Want to Ride "

" I tried to be normal once...
it was the most boring
2 minutes of my life!!!!"

Offline CudamanTom

  • Resident
  • *****
  • Posts: 2670
Re: new pics of 4 door cuda
« Reply #5 on: November 06, 2014 - 09:59:41 PM »
I hope we keep included on the progress and the end product.
I'm usually not a 4 door guy, but for this I would like to see being built.  :2thumbs:
1971 Cuda Vert 440-833 - (clone)
1971 Cuda 440-727 - (clone)


Because I like it fast!!!

Offline Falbz

  • Jr. Member
  • **
  • Posts: 381
Re: new pics of 4 door cuda
« Reply #6 on: November 07, 2014 - 10:46:03 AM »
I hope we keep included on the progress and the end product.
I'm usually not a 4 door guy, but for this I would like to see being built.  :2thumbs:

 :iagree:

Offline dyslexic teddybear

  • Dyslexic's untie!!
  • Jr. Member
  • **
  • Posts: 34
Re: new pics of 4 door cuda
« Reply #7 on: November 07, 2014 - 11:23:00 AM »
Even with the controversy over the details of the inspiration of the project.......I never heard of any doubt over the quality of the build.

It was expected to be excellent......and appears to be at this stage. Previous projects have set the bar pretty high, and I am really curious to see the lines of the finished car. Morphing 2 body styles together.....is not an easy task.
 
Weekend internet legend in his own mind.

Offline resq302

  • Sr. Member
  • ****
  • Posts: 1114
Re: new pics of 4 door cuda
« Reply #8 on: November 07, 2014 - 03:50:44 PM »
Even with the controversy over the details of the inspiration of the project.......I never heard of any doubt over the quality of the build.

It was expected to be excellent......and appears to be at this stage. Previous projects have set the bar pretty high, and I am really curious to see the lines of the finished car. Morphing 2 body styles together.....is not an easy task.


From what I recall, most of the controversy was from a member who wouldn't stop criticizing the appearance of the unfinished roof line.  Dave repeatedly told him that the roof was not finished and would look correct when everything was complete.  I guess some people feel the need to criticize others when they are getting attention for doing something this unique in the Mopar world.   

Here are a few pictures I grabbed of the door gaps from the other thread. The doors had to be fabricated from scratch so there were no factory specifications to follow.  Dave said he used a feeler gauge throughout the entire perimeter of the openings to make sure the gaps were consistent between all of the panels.  So far so good it seems.  All I know is that I would NEVER have undertaken something as large as this!




Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: new pics of 4 door cuda
« Reply #9 on: November 07, 2014 - 03:59:36 PM »
 :popcorn:

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: new pics of 4 door cuda
« Reply #10 on: November 07, 2014 - 04:05:06 PM »
Sure makes for getting into the back seat a lot easier...................................Very interesting.............. :2thumbs:
Dave or David

Offline drewcrane

  • Sr. Member
  • ****
  • Posts: 1298
Re: new pics of 4 door cuda
« Reply #11 on: November 07, 2014 - 08:44:58 PM »
VERY COOL  KEEP US UPDATED    :thumbsup:

Offline dyslexic teddybear

  • Dyslexic's untie!!
  • Jr. Member
  • **
  • Posts: 34
Re: new pics of 4 door cuda
« Reply #12 on: November 07, 2014 - 09:03:03 PM »
From what I recall, most of the controversy was from a member who wouldn't stop criticizing the appearance of the unfinished roof line.  Dave repeatedly told him that the roof was not finished and would look correct when everything was complete.  I guess some people feel the need to criticize others when they are getting attention for doing something this unique in the Mopar world.   

Here are a few pictures I grabbed of the door gaps from the other thread. The doors had to be fabricated from scratch so there were no factory specifications to follow.  Dave said he used a feeler gauge throughout the entire perimeter of the openings to make sure the gaps were consistent between all of the panels.  So far so good it seems.  All I know is that I would NEVER have undertaken something as large as this!







First, I'll agree 100% on this.....I wouldn't undertake something this large either.

I would consider myself a master craftsman, if I could come close to this level of work. Dave is very lucky to have found someone who could craft metal for him to this level. I can't recall his name, I know Dave mentioned it over on the Charger site thread before he deleted it. If you recall his name, would be great to post it with his accomplishment. He certainly deserves the recognition.

As to the controversy....IIRC, wasn't about anyone's need to criticize a custom car......but more about VIN tags, and door stickers made to reflect the "now" equipment on the car.

Dave assured us it all legal, that he had permission from the proper authorities, to produce an altered to reflect the new equipment[engine, trans, etc] a VIN tag and door sticker. Personally, I don't understand how he could work that.....but I'll take Dave at his word that's it's legal to do that.

It's certainly understandable many [myself included] were very concerned about the "new" tag......there's a lot of fake tags, and people have been burned by fakes and rebodies passed off as the real thing. A very spirited discussion, more then one ego......some reference to Ethel Merman and her cat....that part was pretty funny.....

Better just focus on the car......hope pic's keep being posted.....would definitely like to see the end result.  :popcorn: :popcorn:
Weekend internet legend in his own mind.

Offline resq302

  • Sr. Member
  • ****
  • Posts: 1114
Re: new pics of 4 door cuda
« Reply #13 on: November 07, 2014 - 09:11:18 PM »

As to the controversy....IIRC, wasn't about anyone's need to criticize a custom car......but more about VIN tags, and door stickers made to reflect the "now" equipment on the car.

Dyslexic teddybear,

I think the controversy was more over the roof than the actual stickers and tags and such.  Some people seemed to obsessed with the curvature of the roof line even though it was still in the fabrication stage and far from the finished product or even "body in white" stage.

Offline dyslexic teddybear

  • Dyslexic's untie!!
  • Jr. Member
  • **
  • Posts: 34
Re: new pics of 4 door cuda
« Reply #14 on: November 07, 2014 - 09:36:20 PM »
Dyslexic teddybear,

I think the controversy was more over the roof than the actual stickers and tags and such.  Some people seemed to obsessed with the curvature of the roof line even though it was still in the fabrication stage and far from the finished product or even "body in white" stage.

Oh that was part of it......the extra height of the B-body roof........it did look strange at first. I do remember for certain.....no one doubted that the finished car would reach the standards Dave has set for himself. It's a shame Dave felt he had to delete his posts, I would have gone over again what he posted.....just to better understand the complexities of joining a 4dr B-body center section and E-body nose and derrière. Every time I see cars apart, I get a better understanding of how Chrysler built them.

Do you know if Dave ever found any documentation to back up his claim.....that Chrysler did actually build a 4dr prototype? I think he said a running and driving prototype. That this was to be a recreation of? I know that was disputed.....vigorously.....

Interesting car. Different and unique. Keep posting the pic's! :2thumbs:
Weekend internet legend in his own mind.