Dash Lights-how many you supposed to have?

[djais1801]

I see that there are 4 spaces in the light bar as I look up from underneath. But it looks like on mine, only 2 have lights/and a blue/green film and the other 2 have nothing, like a plastic cover. 
Are you supposed to have 4 illuminated or just 2?

[dfrazz]

4 lights, one over each gauge - you are probably missing the blue/green covers.

[djais1801]

4 lights, one over each gauge - you are probably missing the blue/green covers.

how involved is it to remove the light bar to fix/modify?

[4Cruizn]

Not hard . . . a few screws.   

[dfrazz]

how involved is it to remove the light bar to fix/modify?

Just a couple of screws into the dash.  You can decide if you want to replace the blue/green film with clear bulbs or switch to color LEDs. 

http://www.cuda-challenger.com/cc/index.php?topic=98932.msg974025#msg974025

[djais1801]

Just a couple of screws into the dash.  You can decide if you want to replace the blue/green film with clear bulbs or switch to color LEDs. 

http://www.cuda-challenger.com/cc/index.php?topic=98932.msg974025#msg974025

Thanks...I'm hoping all the sockets are there and just have to add bulbs/film.

[HP2]

In a pinch, candy apple blue painted on the bulbs will be a substitute for the little covers.

[DAYLEY/CHALLENGER]

Or you could wire in a replacement led strip.......Actually......it was too bright so I covered every other inch with electrical tape to dim the lights.......

[Katfish]

Very nice!

[djais1801]

  yeah man...I dig that LED strip. How did you wire it?

[DAYLEY/CHALLENGER]

I wired the strip into the  wiring for the regular 4 light bar.  Got it at Advance Auto. You can get  different lengths of light strips.  It has peal and stick on the back for adhesion.