Tear in billboard

[EMCD]

Some dinged my 340 billboard, tearing the vinyl. The billboard is maybe a year old and is a 3M product. Can I order just the door panel? Will it come w/o hurting the paint?

[anlauto]

Where'd you buy it from ?

[Racer57]

Would it be possible to find a local decal shop and have them make a new one using the applied one as a pattern ?

[750-h2]

Performance Car Graphics will sell you just the door portion of the decal. They also use 3M.

[anlauto]

Performance Car Graphics will sell you just the door portion of the decal. They also use 3M.

That's what I was going to say.....and I'm sure ChallengerGary would do the same if you bought from him.

[EMCD]

I bought it from Dave at Roseville

[brads70]

That's what I was going to say.....and I'm sure ChallengerSteve would do the same if you bought from him.

Challengergary.... I agree I bought my T/A stripes from him and when I did my fender project I bought just the fender parts. Perfect match!
I'd guess you could remove the old one with a heat gun if your careful? 

[anlauto]

Challengergary.... I agree I bought my T/A stripes from him and when I did my fender project I bought just the fender parts. Perfect match!
I'd guess you could remove the old one with a heat gun if your careful?

Gary ? Steve ? What's the difference...you knew what I meant

[brads70]

Gary ? Steve ? What's the difference...you knew what I meant

Sheesh, 12 noon and your into the sauce already!  ( just kidding)

[roadman5312]

Sheesh, 12 noon and your into the sauce already!  ( just kidding)

                         Gotta stay warm somehow I guess   

[AAR6BBL]

It's the workload I'm telling ya. The pressure is getting to him.
You can see the effects already!!
Pretty soon he will be answering his own questions like I do!
But then I have an excuse, those voices in your head are so demanding.

[EMCD]

So, if I carfully heated the strip up, it would come off easily?

[anlauto]

3M makes a woodgrain remover that won't harm the paint.

[tommyg29]

Im no expert but vinyl coming from different batches may have a slightly different look.  I'm guessing there are several manufacturers of the vinyl material, including 3M, but even they run different batches.
I would ask Dave where he got them, and try to contact that vendor to see if you can get just the one door panel. Might be a slightly better chance of an exact match.
 

[brads70]

3M makes a woodgrain remover that won't harm the paint.

Learn something new everyday!