1970 Barracuda 1/4 panel scoops

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2 3 4

    Author Topic: 1970 Barracuda 1/4 panel scoops  (Read 12505 times)

    Offline 426ragtop

    • Jr. Member
    • **
    • Posts: 54
    1970 Barracuda 1/4 panel scoops
    « on: May 03, 2005 - 07:46:57 PM »
    Having owned a car that came equipped with this option.
    Doe's any 1 else out here own a 70 barracuda equipped with the M46 simulated 1/4 panel scoops.
    I also owned an N O S pair back around 1990 , when I finally decided to part with they a couple years later,thay were hard to sell..

    Maybe  T/A  can shed some insight from cars in his registry .

    For the record. Of all the 1970 Barracuda s built.

    The foolowing came eqipped with the M46 option.

    8 cly coupe  -  0.4  %
    8 cly hardtop - 2.3  %
    8 cly convertible - 1.8 %

     take care        426
    Logged
    as long as its a mopar


    Offline moparbowhunter

    • Sr. Member
    • ****
    • Posts: 1357
    • MOPARS RULE AND ALL OTHERS DROOOL!!!
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #1 on: May 03, 2005 - 08:39:31 PM »
    sweet, i dont believe that i have ever seen one with that option. if anyone has pics of one with that option please post them
     :worthless:
    Logged
    70 Barracuda

    Alaskan_TA

    • Guest
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #2 on: May 03, 2005 - 11:25:00 PM »
    They are unusual, I only have five Barracudas with M46 registered so far. In addition to the scoops, the lower body was blacked out and there were colored pin stripes over the mask line. Very cool cars, and odd that the scoops were not available on Cuda's too.

    I do not believe that I have any photos, but I will take a look......

    Barry


    Logged

    Offline 426ragtop

    • Jr. Member
    • **
    • Posts: 54
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #3 on: May 04, 2005 - 07:28:31 PM »
    Hi T/A , I knew you would have something on them there scoops,,,



    426
    Logged
    as long as its a mopar

    Offline Mr. 6pak2go

    • Resident
    • *****
    • Posts: 2266
    • Restore it dont crush it!
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #4 on: May 04, 2005 - 07:31:04 PM »
    Iv never seen them!! does anybody have pics???
    Logged
    My family, My cars, My guns three things il fight for!!

    Offline OzCuda

    • Jr. Member
    • **
    • Posts: 479
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #5 on: May 05, 2005 - 12:49:32 AM »
    Are they the same as the ones at the bottom of this link?  These are listed for Challengers - any pics of them on these maybe?

    https://www.jimsautoparts.com/body.htm
    Logged
    '70 Barracuda

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #6 on: May 05, 2005 - 01:12:02 AM »
    here it is. I remember this post
    Logged
    Mike, Fremont, CA.

    Offline OzCuda

    • Jr. Member
    • **
    • Posts: 479
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #7 on: May 05, 2005 - 08:22:20 AM »
    ?? for collecting mud???
    Logged
    '70 Barracuda

    Offline Old Moparz

    • Jr. Member
    • **
    • Posts: 334
    • Larks' Tongues In Aspic
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #8 on: May 05, 2005 - 10:10:37 AM »
    Quote from: topcatcuda on May 05, 2005 - 01:12:02 AM
    here it is. I remember this post

    Yeah to mud, & also dampness, water, road salt, leaves, twigs & whatever else a shop vac scoop can pick up. I was definitely curious as to what they looked like, but now after seeing them, I don't like it much. I like the Challenger quarter scoops much better. I do like the finned, chrome trim, that goes in the same spot on the A-Body Barracudas.
    Logged
    Newburgh, New York - 12550

      Walking is good for you. It's documented that for every minute you exercise, you add a minute to your life. This enables you to spend an additional 5 months in a nursing home at $5000 per month.

    Offline 704406bblcuda

    • Jr. Member
    • **
    • Posts: 39
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #9 on: May 09, 2005 - 10:38:12 PM »
    They were not available on 'Cudas since they came standard with the rocker gills.  Neat option though :patriot:
    Logged
    '70 'Cuda 440+6bbl 4-spd 4.10 Dana N96 EV2 EV2
    '69.5 A12 Bee 440 6pack 4-spd 4.10 Dana EV2 V1X
    '69 Dart Swinger 340 4-spd 3.91 F6 V1X
    '70 AAR 340+6bbl 4-spd 3.55 EB5 EB5 H6B5 Sold
    '70 'Cuda 440+6bbl 4-spd 4.10 Dana N96 FK5 V1G Sold
    '70 'Cuda 440+6bbl 4-spd 4.10 Dana N96 EK2 V1X Sold
    '70 RR 383 4-spd 3.91 Sold
    '99 Viper RT10 blck/cognac 488 6-spd Sold
    '05 Ram 2500 CTD auto LWB Bully Dog beast!

    Offline JS27N0B

    • Resident
    • *****
    • Posts: 4809
    • Member since Jan 28th 2003.
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #10 on: May 10, 2005 - 08:18:54 PM »
    I have never seen a set, but if that is them they look like crap.
    Logged
    1970 Challenger R/T Convertible 383/auto 1 of 516 *now sold after owning for 18yrs
    2007 Chrysler Aspen Limited AWD
    2013 Tige' RZR 343hp
    2016 PCP Challenger SRT Hellcat

    Offline Street_Challenged73

    • Sr. Resident
    • ******
    • Posts: 8826
    • '73 FC-7 Challenger..Member since October 20, 2002
      • My '73 Challenger Restoration Page
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #11 on: May 10, 2005 - 08:59:12 PM »
    Quote from: OzCuda on May 05, 2005 - 12:49:32 AM
    Are they the same as the ones at the bottom of this link?  These are listed for Challengers - any pics of them on these maybe?

    https://www.jimsautoparts.com/body.htm

    Oz, those scoops are the quarter panel scoops used on a '71 Challenger R/T.  They actually fit on the quarter panel between the wheel well opening and the door.

    As for those rocker scoops, I've never seen a car equipped with those.  Definitely different.
    Logged
    1973 Dodge Challenger......................The ongoing project. (00/----\00)
    1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
    1990 Toyota Celica GT Liftback...........The new daily & winter driver.
    All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                                 
                     
    Street_Challenged73 from Wisconsin

    Offline 426HEMI

    • Sr. Resident
    • ******
    • Posts: 5187
    • My M46 Barracuda! Member Since:October 01, 2005
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #12 on: October 01, 2005 - 11:37:41 AM »
    I have a 1970 barracuda with M46 scoops.  I have not started the restore yet but do have it in primer.

    I would also like to see a Picture of a correctly painted Barracuda with this option.

    I have had several Barracuda's and Cuda's. 

    I had never seen one with this option before I purchased it a few years ago.
    « Last Edit: October 01, 2005 - 11:44:45 AM by flashcuda »
    Logged
    Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

    1970 M46 Barracuda
    1998 Dodge Darango

    Gordon

    Offline nakita7

    • Jr. Member
    • **
    • Posts: 348
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #13 on: October 01, 2005 - 06:33:29 PM »
    What in the world are you guys taliking about??? Let's see some pics...
    Logged
    72 Charger Rallye (440 auto)
    72 Charger Rallye (318 auto)
    71 Charger RT

    Offline 426HEMI

    • Sr. Resident
    • ******
    • Posts: 5187
    • My M46 Barracuda! Member Since:October 01, 2005
    Re: 1970 Barracuda 1/4 panel scoops
    « Reply #14 on: October 01, 2005 - 07:40:00 PM »


    This is what we are talkin about the scoop on the quarter panel.
    I have yet to find any GOOD pics of this scoop acutally restored. I am in the process of restoring this barracuda and need to know about how to stripe the bottom. Also this barracuda has a blacked out rear panel like the cuda does shown here.

    So if anyone has any pics or information it would be greatly appreciated.
    Logged
    Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

    1970 M46 Barracuda
    1998 Dodge Darango

    Gordon
    Pages: [1] 2 3 4
    « previous next »