Author Topic: Harbor Freight Tumbler  (Read 5278 times)

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Harbor Freight Tumbler
« on: January 11, 2015 - 05:22:23 PM »
Just like the one pictured below.
I used a little Evaporust on hardware, nuts, bolts, etc. restorations with this.

Used.
Dirty but that doesn't stop it from working.

Green diamond rocks included.
Probably need to get new ones soon if you plan to use alot.

$18.00 plus shipping.
From Fremont, CA 94536

http://www.harborfreight.com/5-lb-metal-vibrator-tumbler-67617.html
Mike, Fremont, CA.





Offline ToxicWolf

  • Resident
  • *****
  • Posts: 2416
Re: Harbor Freight Tumbler
« Reply #1 on: January 11, 2015 - 07:04:53 PM »
That's cool.   :2thumbs:

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Harbor Freight Tumbler
« Reply #2 on: January 11, 2015 - 07:18:17 PM »
Does this damage bolt threads at all? 

What have you used in it? 

Anything other than bolts? 

"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Harbor Freight Tumbler
« Reply #3 on: January 11, 2015 - 07:33:19 PM »
Does this damage bolt threads at all? 

What have you used in it? 

Anything other than bolts?


Josh

I did alot of parts in it.
Bolts come out perfect on the threads. No damage.
Triangles are plastic.

Look at the video below...
http://www.harborfreight.com/5-lb-metal-vibrator-tumbler-67617.html

I put brackets, washers, nuts, nolts, clips, you name it!

After tumbling parts in it with Evaporust, laquer thinner them to remove any remaining moisture.

Then paint,
or RPM from ECS,
or phosphate coating kit from Eastwood.
Mike, Fremont, CA.


Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Harbor Freight Tumbler
« Reply #4 on: January 11, 2015 - 09:27:47 PM »
Where do you get the evaporust?
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Harbor Freight Tumbler
« Reply #5 on: January 11, 2015 - 09:29:43 PM »

How long do you run the tool until the bolts are cleaned?

Do you have to clean the oil and gunk off of the bolts before putting into the tool?

I'm curious so I'm kickin your tires. 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: Harbor Freight Tumbler
« Reply #6 on: January 11, 2015 - 09:30:16 PM »
Mike, how much to ship to 14305? Ian

Offline killerfish

  • Jr. Member
  • **
  • Posts: 85
Re: Harbor Freight Tumbler
« Reply #7 on: January 11, 2015 - 09:32:14 PM »
Josh

I did alot of parts in it.
Bolts come out perfect on the threads. No damage.
Triangles are plastic.

Look at the video below...
http://www.harborfreight.com/5-lb-metal-vibrator-tumbler-67617.html

I put brackets, washers, nuts, nolts, clips, you name it!

After tumbling parts in it with Evaporust, laquer thinner them to remove any remaining moisture.

Then paint,
or RPM from ECS,
or phosphate coating kit from Eastwood.




 :iagree: works great and the price is a good deal cuz if memory serves me right you still have to buy the media

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Harbor Freight Tumbler
« Reply #8 on: January 12, 2015 - 12:34:24 AM »
How long do you run the tool until the bolts are cleaned?

Do you have to clean the oil and gunk off of the bolts before putting into the tool?

I'm curious so I'm kickin your tires.

Depends on the amount of rust and gunk on it.

Evaporust cleans as well as de rusts.
1-3 hours is average.
Mike, Fremont, CA.


Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Harbor Freight Tumbler
« Reply #9 on: January 12, 2015 - 12:37:00 AM »
Where do you get the evaporust?

Harbor Freight sells it.
there's other brands out there as an alternative.

WD40 sells a version I think.
Rustaway is another brand.

Usually 20 -25 bucks a gallon.
Muratic acid works too but that's some nasty stuff to deal with.   
Mike, Fremont, CA.


Offline usraptr

  • Sr. Member
  • ****
  • Posts: 1814
Re: Harbor Freight Tumbler
« Reply #10 on: January 14, 2015 - 02:14:15 PM »
If it's still available, I'll take it.
Let me know.
1970 Plymouth 'Cuda.  Matching numbers 440 U Code, 4 speed pistol grip, Rallye dash, AM 8 Track, Shaker hood, 15 inch rallye wheels, Dana 60 4.10, Super Track Pak.  One of 134 - 440 "U" coupes codes built in 1970 and one of 100 - 440 Super Track Paks built in 1970.

Restoration pictures at:  http://spanks4thememory.smugmug.com/Cars/70-Cuda/7240639_M24oi#465274575_2MBqW
(Edited 8-1-17)

"usraptr" = United States raptor - bird of prey = United States Bald Eagle.  FYI, somebody else thought of it first so I had to drop the "O" in raptor.

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Harbor Freight Tumbler
« Reply #11 on: January 14, 2015 - 02:38:00 PM »
So far it is still available. I sent a quote to Cudahunter. $19.52 usps. Jimmynick declined earlier on my first ups quote. In case he sees this: USPS quote is $27.20. Send me yout complete address wher you want it shipped to just in case.
Mike, Fremont, CA.


Offline BJU

  • Jr. Member
  • **
  • Posts: 12
  • Mean Green Machine
Re: Harbor Freight Tumbler
« Reply #12 on: January 15, 2015 - 10:25:26 AM »
Can you tell me where you get the green "rocks' you use for your polishing media- I have a tumbler and would like to try them to polish some old Mopar bolts I have. Thanks!

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Harbor Freight Tumbler
« Reply #13 on: January 15, 2015 - 10:36:38 AM »
Can you tell me where you get the green "rocks' you use for your polishing media- I have a tumbler and would like to try them to polish some old Mopar bolts I have. Thanks!


Harbor Freight

http://www.harborfreight.com/catalogsearch/result?q=tumbler+media
Mike, Fremont, CA.


Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Harbor Freight Tumbler
« Reply #14 on: January 15, 2015 - 09:09:58 PM »
So far it is still available. I sent a quote to Cudahunter. $19.52 usps. Jimmynick declined earlier on my first ups quote. In case he sees this: USPS quote is $27.20. Send me yout complete address wher you want it shipped to just in case.

 :2thumbs:
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee