News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 70 chall rear frame rail holes  (Read 2138 times)

    Offline brotow

    • Full Member
    • ***
    • Posts: 826
    • There really is a Challenger in the backround
    70 chall rear frame rail holes
    « on: February 01, 2015 - 12:50:44 PM »
    Does anyone know what goes on the two 7/16 holes on the bottom of the rear frame rails about 1 1/2 to 2 feet from the rear shackles, about even with the rear wheel wells, before the shock mount cross member?
    Logged
    70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster


    Offline shawge

    • Full Member
    • ***
    • Posts: 571
    • Zoiks!!
    Re: 70 chall rear frame rail holes
    « Reply #1 on: February 01, 2015 - 01:09:36 PM »
    Probably the transport tie downs.  I think they were typically removed by the dealer.
    Logged
    - Jerry

    Offline shawge

    • Full Member
    • ***
    • Posts: 571
    • Zoiks!!
    Re: 70 chall rear frame rail holes
    « Reply #2 on: February 01, 2015 - 01:14:56 PM »
    Or maybe the axle bump stops?

    Logged
    - Jerry

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: 70 chall rear frame rail holes
    « Reply #3 on: February 01, 2015 - 01:15:14 PM »
     :iagree:

    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline brotow

    • Full Member
    • ***
    • Posts: 826
    • There really is a Challenger in the backround
    Re: 70 chall rear frame rail holes
    « Reply #4 on: February 01, 2015 - 01:30:49 PM »
    Quote from: shawge on February 01, 2015 - 01:09:36 PM
    Probably the transport tie downs.  I think they were typically removed by the dealer.

    Yep, the transport tie downs. I'll be re-installing them. Thanks, and thank you for the picture.
    Logged
    70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: 70 chall rear frame rail holes
    « Reply #5 on: February 01, 2015 - 05:37:25 PM »
    They don't hurt anything and are good if you are ever going to transport your car. 
    Logged

    Offline AAR6BBL

    • Jr. Member
    • **
    • Posts: 146
    Re: 70 chall rear frame rail holes
    « Reply #6 on: February 18, 2015 - 02:02:09 PM »
    So that is what the hell those things are! I thought at first that they were tow brackets :screwy:
    They looked like they were factory from the markings, but I had no idea what they were for.
    Now it makes sense
    This forum is awesome :thumbsup:
    Greg
    Logged
    "There's no such thing as putting a '70 AAR 'Cuda exactly where you want it. The 'Cuda isn't interested in such things, for they require finesse. Finesse asked the 'Cuda out to dinner once, but the 'Cuda stood it up to go drink beer under an overpass with her hot little sister. As far as this car is concerned, finesse can go stuff itself."

    Offline brotow

    • Full Member
    • ***
    • Posts: 826
    • There really is a Challenger in the backround
    Re: 70 chall rear frame rail holes
    « Reply #7 on: February 18, 2015 - 05:32:32 PM »
    The picture shows how the brackets are installed, however mine seem to fit better with the left and right reversed as the picture.  Is there a correct way the higher edge should face? Inside or outside?
    Logged
    70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

    Offline burdar

    • Sr. Resident
    • ******
    • Posts: 5925
    Re: 70 chall rear frame rail holes
    « Reply #8 on: February 19, 2015 - 10:14:11 AM »
    The picture is correct.  The "open" edge goes to the outside...
    Logged

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: 70 chall rear frame rail holes
    « Reply #9 on: February 19, 2015 - 10:32:37 AM »
    Odd...The above picture looks a lot like a 71 Cuda I restored years ago....but even I don't have pictures of it :clueless:
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com
    Pages: [1]
    « previous next »