So I finished cleaning up my wiring and now I'm having starting issues so I messed something up. Only other thing I did was replace the plastic inline fuel filter with a steel one.
When I crank the engine over, it cranks kind of stumbles but won't start. I had the 4 and 6 wires switched originally. Fixed those and verified order, still won't start. Battery is charged, fuel is spraying into the carb when I move the throttle linkage, fuel pressure is around 4-6. Will pull a plug tomorrow to check spark. Other than pulling spark plug wires, the only other wires I touched were the positive and negative from the msd to the battery. I cut them to shorten excess, Would I get these symptoms if I accidentally switched them when splicing? Everything else from a wiring perspective stayed as is.
Figured I'd post on here for any ideas where to look before I start ripping apart all the wire looms...