Starter recommendation 5.7L w/Tremec

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Starter recommendation 5.7L w/Tremec  (Read 2128 times)

    Offline renegade0131

    • Jr. Member
    • **
    • Posts: 27
    Starter recommendation 5.7L w/Tremec
    « on: February 10, 2015 - 07:07:06 PM »
    I am going with a 5.7L hemi and a Tremec 5 speed in my 70 Challenger with a Quicktime bell housing. I have a right hand starter position on my bell housing. I did this to gain some room on the LH side because of the steering box being over there.
    Can anyone recommend a RH mini starter that they have used with this combo that worked well?
    Any additional insight from those have been through this is welcome.
    Thanks in advance.  :2thumbs:

    Jon
    Logged


    Offline wegner426

    • Jr. Member
    • **
    • Posts: 11
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #1 on: February 13, 2015 - 11:00:23 PM »
    You might check with RobbMC Performance.  One of his may work, as he offers them for many different applications and they have some cool features.  Not cheap though.

    http://www.robbmcperformance.com/products.html
    Logged

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #2 on: February 13, 2015 - 11:48:12 PM »
    Quote from: renegade0131 on February 10, 2015 - 07:07:06 PM
    I am going with a 5.7L hemi and a Tremec 5 speed in my 70 Challenger with a Quicktime bell housing. I have a right hand starter position on my bell housing. I did this to gain some room on the LH side because of the steering box being over there.
    Can anyone recommend a RH mini starter that they have used with this combo that worked well?
    Any additional insight from those have been through this is welcome.
    Thanks in advance.  :2thumbs:

    Jon

    Are you sure you want a bellhousing with a Right-hand starter? Pretty much every header option for a 5.7L/Ebody is intended to have a LH [factory] starter location.
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link

    Offline calicuda70

    • 2 evil 70's and 1 BAD 11
    • Jr. Member
    • **
    • Posts: 246
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #3 on: February 14, 2015 - 12:19:33 AM »
    I believe tti makes right hand starter headers.

    James
    Logged
    70 'Cuda 5.7 Hemi protouring resto
    70 Challenger 360
    11 Challenger SRT8 392

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #4 on: February 15, 2015 - 06:00:00 PM »
    Quote from: calicuda70 on February 14, 2015 - 12:19:33 AM
    I believe tti makes right hand starter headers.

    James


    I had to look it up, and yes, that's correct! They did note that they will not fit with Torsion Bars....just tossing that out there if the OP has those still or not.
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link

    Offline bigblue73

    • Full Member
    • ***
    • Posts: 504
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #5 on: February 18, 2015 - 04:26:54 PM »
    Factory Gen III location for the starter is on the passenger side. 
    The aftermarket transmissions dictate the left side for clearance issues in the factory chassis.  I've sold nothing but left hand (drivers side) starter bell housings.
    Logged

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Starter recommendation 5.7L w/Tremec
    « Reply #6 on: March 17, 2015 - 08:53:00 PM »
    Quote from: renegade0131 on February 10, 2015 - 07:07:06 PM
    I am going with a 5.7L hemi and a Tremec 5 speed in my 70 Challenger with a Quicktime bell housing. I have a right hand starter position on my bell housing. I did this to gain some room on the LH side because of the steering box being over there.
    Can anyone recommend a RH mini starter that they have used with this combo that worked well?
    Any additional insight from those have been through this is welcome.
    Thanks in advance.  :2thumbs:

    Jon

    I just ordered a factory challenger starter from dodge  :cheers:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...
    Pages: [1]
    « previous next »