So I got it home last Friday, but still waiting on the bank's lien release letter before I can title it. The old owner is letting me use his plates till he gets me the letter.
So now I have a couple of questions. How do I see a wiring diagram without buying a service manual?
1. My AC/Heat blower switch only works on high. Is there a resistor pack or another fuse for low and med speeds?
2. My ESP/BAS light sometimes comes on when driving. I did a google search and the solution is to turn the wheel lock to lock to reset it. If it stays on a wheel sensor is bad so take it to a dealer. Has anyone here fixed their own esp/bas light? I can measure sensor signals and can swap wheel sensors around. I just don't want to use a dealer till I have to. I've been playing with electronics since I could read a schematic. My low tire pressure light is on so this could probably be the solution but as you can see, the poor car has to sit outside while my good cars are inside. We just got our first winter snow today, 2 inches. I'll troubleshoot and check tire pressures when the snow melts.
