anyone have 17inch TTII's???

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: anyone have 17inch TTII's???  (Read 4956 times)

    Offline Belltone85

    • Jr. Member
    • **
    • Posts: 119
    • 1973 Dodge Challenger 360 Crate Motor, Slap Stick
    anyone have 17inch TTII's???
    « on: May 10, 2005 - 08:38:19 PM »
    does anyone have 17 inch torque thrust 2's?? if you do what rim width and tire size do you have on the front/back??? and what back spacing?? thanks
    Logged


    Offline cuda2002

    • Jr. Member
    • **
    • Posts: 25
    Re: anyone have 17inch TTII's???
    « Reply #1 on: May 10, 2005 - 10:52:32 PM »
    Just put some on my car last week.  I used 17x8 front and back with a 4" back space in the front and 4.75 in the back.   I used Falken 451 rubber with 235/40's in the front and 275/40's in back.  The back tire clears the wheel well lip by about 1/4" and I have about 3/4" to the spring. I also bought the Carlisle 3 spoke center piece (spinners??) which were quite expensive but I think the add a different look to the wheel. 
    « Last Edit: May 16, 2005 - 05:21:05 PM by AprilsPink72Cuda »
    Logged

    Offline Killer_Mopar

    • Sr. Member
    • ****
    • Posts: 1886
    Re: anyone have 17inch TTII's???
    « Reply #2 on: May 10, 2005 - 10:59:16 PM »
    I resized that huge pic for better viewing.....
    Logged
    70 Challenger R/T SE - The never-ending project........

    Offline Killer_Mopar

    • Sr. Member
    • ****
    • Posts: 1886
    Re: anyone have 17inch TTII's???
    « Reply #3 on: May 10, 2005 - 11:01:17 PM »
    Do you have a side view??? I would love to see what the 17s look like with the rest of the car....
    Logged
    70 Challenger R/T SE - The never-ending project........

    Offline cuda2002

    • Jr. Member
    • **
    • Posts: 25
    Re: anyone have 17inch TTII's???
    « Reply #4 on: May 10, 2005 - 11:18:03 PM »
    Thanks for resizing the pic....I just figured out how to do that.

    I just took a quick shot which I'll attach.  It was raining when I brought the car home so the car is a little bit dirty and I don't have the spinners yet, their suppose to be in this week.  I post a good picture when I have everything in place. :)
    Logged

    Offline 2000gt

    • Jr. Member
    • **
    • Posts: 488
    Re: anyone have 17inch TTII's???
    « Reply #5 on: May 10, 2005 - 11:30:43 PM »
    I'd love to see a few of the car when done also.  I am thinking of going that colour and have the same wheels.  Marbury, I have the eagle TT II knockoffs and went with 17 x 8 up front and 17 x 9.5 in back.  Sorry, I don't know the backspacing.  I have 3/4 inch relo kit and an b-body rearend but they will fit even with the stock rear and no relo kit, a friend had them on his Chally.
    Logged

    Offline Street_Challenged73

    • Sr. Resident
    • ******
    • Posts: 8826
    • '73 FC-7 Challenger..Member since October 20, 2002
      • My '73 Challenger Restoration Page
    Re: anyone have 17inch TTII's???
    « Reply #6 on: May 11, 2005 - 12:01:27 AM »
    That car looks very cool, Cuda2002!!! :drool: :drool:
    Logged
    1973 Dodge Challenger......................The ongoing project. (00/----\00)
    1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
    1990 Toyota Celica GT Liftback...........The new daily & winter driver.
    All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                                 
                     
    Street_Challenged73 from Wisconsin

    Offline Belltone85

    • Jr. Member
    • **
    • Posts: 119
    • 1973 Dodge Challenger 360 Crate Motor, Slap Stick
    Re: anyone have 17inch TTII's???
    « Reply #7 on: May 11, 2005 - 11:30:31 AM »
    ya thanks. i am really only worried about the front cause i don't want the tires to rub or hit anything
    Logged

    Offline Fred

    • Jr. Member
    • **
    • Posts: 305
    Re: anyone have 17inch TTII's???
    « Reply #8 on: May 11, 2005 - 11:56:12 AM »
    Very nice looking car and wheels!  I'm trying to decide about a tire/wheel combination.

    I am new to the site.  Is this a popular wheel for Cuda's/Challenger's?  Who is the manufacturer?
    Logged

    Offline HemiDog

    • Sr. Member
    • ****
    • Posts: 1384
    • Do not Assume!
      • Hemi Dog
    Re: anyone have 17inch TTII's???
    « Reply #9 on: May 11, 2005 - 12:21:49 PM »
    American Racing.
    http://www.americanracing.com/
    They are pretty popular for about any car.  They just happen to be one of the few manufacturers that provide the correct bolt pattern for Mopars.
    Logged

    Offline Limecuda

    • Jr. Member
    • **
    • Posts: 78
    Re: anyone have 17inch TTII's???
    « Reply #10 on: May 12, 2005 - 10:45:13 PM »
    Quote from: 2000gt on May 10, 2005 - 11:30:43 PM
    I'd love to see a few of the car when done also.  I am thinking of going that colour and have the same wheels.  Marbury, I have the eagle TT II knockoffs and went with 17 x 8 up front and 17 x 9.5 in back.  Sorry, I don't know the backspacing.  I have 3/4 inch relo kit and an b-body rearend but they will fit even with the stock rear and no relo kit, a friend had them on his Chally.

    Would you mind getting the bs measurements?  I want to go 17x8 and 17x9.5 as well on my 71 Cuda with 245/45 and 275/40s.
    Logged

    Offline 2000gt

    • Jr. Member
    • **
    • Posts: 488
    Re: anyone have 17inch TTII's???
    « Reply #11 on: May 12, 2005 - 11:41:24 PM »
    Ok, I just scrounged up a box and the 9.5s say + 8mm for offset, thats all it says.  I don't have the box for the fronts so I can't help you out there, maybe someone else will be able to.  Good luck
    Logged

    Offline Limecuda

    • Jr. Member
    • **
    • Posts: 78
    Re: anyone have 17inch TTII's???
    « Reply #12 on: May 14, 2005 - 07:22:17 PM »
    Thx.  I have no idea how to cipher that. :ack:   Anyone know?
    Logged

    Offline 70RT/SE

    • Jr. Member
    • **
    • Posts: 37
    • I'm a llama!
    Re: anyone have 17inch TTII's???
    « Reply #13 on: May 14, 2005 - 08:02:14 PM »
    Quote from: Limecuda on May 14, 2005 - 07:22:17 PM
    Thx.  I have no idea how to cipher that. :ack:   Anyone know?

    5.5" Backspace
    Logged

    Offline cuda2002

    • Jr. Member
    • **
    • Posts: 25
    Re: anyone have 17inch TTII's???
    « Reply #14 on: May 15, 2005 - 06:53:13 PM »
    Here is a side on picture. Spinners still not in, maybe this week.

    Logged
    Pages: [1] 2
    « previous next »