Repop cuda drip rail moulding (outer)

[twalker]

Do they not repop these anywhere?  I can't find anything.  Sigh

[anlauto]

Nope. What's wrong with yours ?

[twalker]

Well, I'm afraid it's self induced.  Was polishing it on the wheel and it slipped up and mangled it bad.  I hammer/Dolly'd the best I could and then filed, sanded and buffed.  But unfortunately there wasn't enough material and ended up with this.  Sigh

[cordodge]

Do they not repop these anywhere?  I can't find anything.  Sigh

Hey twalker, what part is that you need? I have some trim you are welcome to it if it's what you need. Also I had all my trim done at a place in Roseville called patmia , you would not believe what these guys can save and cheap

Bruce

[twalker]

Thanks Bruce, I need the passenger side A pillar outer trim.  There is a picture above of my problem area.  The rest of my trim is pretty good, I've been able to hammer out any dents, sand and buff it to a nice shine.  Unfortunately I had a mishap with this piece.

[cordodge]

Thanks Bruce, I need the passenger side A pillar outer trim.  There is a picture above of my problem area.  The rest of my trim is pretty good, I've been able to hammer out any dents, sand and buff it to a nice shine.  Unfortunately I had a mishap with this piece.

Ok , I  know I have a piece that  patmai did it was an extra when I brought all mine over. And if it's not that side I know I have another. Problem is I'm in Mexico, if you can wait you are welcome to it

[twalker]

I can wait, thanks for your help! Just ping when you get back and have time to check.  Cheers

[cordodge]

I can wait, thanks for your help! Just ping when you get back and have time to check.  Cheers

Ok, sorry it's 7;30 and I'm hung over from tequila , I realize now that you don't have a challenger duh!!

Bruce

[twalker]

Hahaa, no problem...I need a vacation like that!

[cordodge]

Hahaa, no problem...I need a vacation like that!

Yeah eh, I will ask around and see if someone has one.  Bruce

[anlauto]

Don't quote me, but I think that piece is the same both Cuda and Challenger, it's worth a look

I had one with a hole in it too, same story, you're not the only one

[cordodge]

Don't quote me, but I think that piece is the same both Cuda and Challenger, it's worth a look

I had one with a hole in it too, same story, you're not the only one

Well I hope so Alan, twalker if that is the case again your welcome to it.

Btw I'm hammered again lol

[twalker]

Sounds like a good trip :-) whereabouts do you live?

[cordodge]

 

Sounds like a good trip :-) whereabouts do you live?

I'm just 10 minutes south of sarnia, your in London right?