Author Topic: Pulling axles, Dana 60  (Read 2590 times)

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Pulling axles, Dana 60
« on: March 11, 2015 - 03:45:40 PM »
     Got the Dana in today from Dr. Diff. Have to pull the axles to install backing plates/brakes. Any tips other than unbolting the flanges and slide hammer out ?  Shop manual mentions some shims that might dislodge  :22yikes: requireing disassembly of the guts  :scared:  I don't want to go there.   :eek4:  Thanks in advance. Just a little irritated it didn't all come assembled as a unit, it was ordered that way.




Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Pulling axles, Dana 60
« Reply #1 on: March 11, 2015 - 03:48:59 PM »

They should just slide out.

 :2thumbs:
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Pulling axles, Dana 60
« Reply #2 on: March 11, 2015 - 03:51:19 PM »
I would give a quick call to Cass at Dr. Diff. Not sure what carrier he used, but he should be able to tell you.

I've heard conflicting reports about factory Dana's....One source says, yea, just pull them out, another says they're clipped on the inside ? :dunno:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: Pulling axles, Dana 60
« Reply #3 on: March 11, 2015 - 04:06:41 PM »
I would give a quick call to Cass at Dr. Diff. Not sure what carrier he used, but he should be able to tell you.

I've heard conflicting reports about factory Dana's....One source says, yea, just pull them out, another says they're clipped on the inside ? :dunno:
                 Yea, calling Cass in the am. When I googled it I got the same thing, some c clips, some not.  :clueless:

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Pulling axles, Dana 60
« Reply #4 on: March 11, 2015 - 05:27:51 PM »
No C clips , but there could be a button in the sure grip that could fall out if there is an end play adjustment

Challenger - You`ll wish You Hadn`t

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: Pulling axles, Dana 60
« Reply #5 on: March 11, 2015 - 05:32:21 PM »
No C clips , but there could be a button in the sure grip that could fall out if there is an end play adjustment
                  Thanks Chryco, I was afraid of that.

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Pulling axles, Dana 60
« Reply #6 on: March 11, 2015 - 09:06:50 PM »
Contact Cass.  I did mine two years ago to do the same thing you are doing.  Slide them out, install disc brake brackets and reinstall the axels.  very easy and no issues.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Pulling axles, Dana 60
« Reply #7 on: March 11, 2015 - 09:23:23 PM »
I got my Dana from Cass too but I upgraded to the tru trac  set up so no button to fall out? I just pulled the axles with no issue to install the disc brakes
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: Pulling axles, Dana 60
« Reply #8 on: March 12, 2015 - 12:38:04 PM »
Thanks for the input guys, E mailed Cass this morn, he responded immediately, no C clips, buttons, or shims. Just yank them out, install brakes, slam em back in.  It's a done deal.  :ylsuper: BTW, these 35 spline axles are awesome.   :woohoo:

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Pulling axles, Dana 60
« Reply #9 on: March 13, 2015 - 11:12:45 PM »
 :2thumbs: more like tree trunks !!

Challenger - You`ll wish You Hadn`t

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: Pulling axles, Dana 60
« Reply #10 on: March 14, 2015 - 07:31:06 AM »
:2thumbs: more like tree trunks !!
                                                              Got that right   :2thumbs:

Offline 1970 RT Challenger 1970

  • Full Member
  • ***
  • Posts: 774
Re: Pulling axles, Dana 60
« Reply #11 on: March 14, 2015 - 04:08:13 PM »
 :thumbsup:

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Pulling axles, Dana 60
« Reply #12 on: March 15, 2015 - 02:45:10 PM »
I am glad to hear that it went easy for you.  Another rewarding job that you tackled yourself.  :2thumbs:



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)