Author Topic: Updating the HEMI In The Beast....  (Read 59676 times)

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #30 on: April 15, 2015 - 09:42:29 AM »
Bruce, I am looking for around 850-870 on pump gas N/A.   The limiting factors for a super quick 1/4 mile time will be the rear gear and torque converter. A trans brake would also help it lay down a number. I am running a 4:10 rear gear and a 3800 converter. Not the best set up for the 60' times it needs to run the real quick numbers that is could with more track oriented gears/converter. I am looking at mid 9's around 140-145 mph.  Not bad for a N/A pump gas car.....    :2thumbs:
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"




Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Updating the HEMI In The Beast....
« Reply #31 on: April 15, 2015 - 12:20:38 PM »
Bruce, I am looking for around 850-870 on pump gas N/A.   The limiting factors for a super quick 1/4 mile time will be the rear gear and torque converter. A trans brake would also help it lay down a number. I am running a 4:10 rear gear and a 3800 converter. Not the best set up for the 60' times it needs to run the real quick numbers that is could with more track oriented gears/converter. I am looking at mid 9's around 140-145 mph.  Not bad for a N/A pump gas car.....    :2thumbs:

 :clapping:   It would be interesting to see you and Jason ( Stroker) go head to head at Carlisle some year!  :stirpot: :2thumbs:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #32 on: April 16, 2015 - 11:44:15 AM »
:clapping:   It would be interesting to see you and Jason ( Stroker) go head to head at Carlisle some year!  :stirpot: :2thumbs:

That would be fun to do.    :burnout:   :grinyes:  But I have to make it back to Carlisle first.....    :bigsmile:
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Updating the HEMI In The Beast....
« Reply #33 on: April 16, 2015 - 04:41:24 PM »
That would be fun to do.    :burnout:   :grinyes:  But I have to make it back to Carlisle first.....    :bigsmile:

Oh you will  :naughty:..... we won't let up bugging you till you do!  :roflsmiley:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline bruce69camaro

  • Jr. Member
  • **
  • Posts: 56
Re: Updating the HEMI In The Beast....
« Reply #34 on: April 17, 2015 - 12:12:22 PM »
Oh you will  :naughty:..... we won't let up bugging you till you do!  :roflsmiley:
He won't come up to Carlisle because he knows a certain orange Camaro will be waiting for him and South Mountain..... :biggrin: :biggrin:

Hey Fish, you remember me telling you about three Cuda's sitting in a guys yard, down the street from me? Well after maybe more than 18 years, they are gone. Two of them were close to your body style and one looked to be a 70. don't know if someone complained and he had to get rid of them, but they are gone.

Offline RzeroB

  • Sr. Member
  • ****
  • Posts: 1496
  • In The Lou and looking for a new (old) ride
Re: Updating the HEMI In The Beast....
« Reply #35 on: April 17, 2015 - 05:41:55 PM »
He won't come up to Carlisle because he knows a certain orange Camaro will be waiting for him..... :biggrin: :biggrin:

Oh oh! The gaunlet has been thrown down!  :popcorn:  :popcorn:
Cheers!
Tom
St Louis, MO

Former owner of 16 classic Mopars. "It is better to have owned (Mopars) and lost then to have never owned at all" (apologies to Alfred Lord Tennyson)

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #36 on: April 20, 2015 - 09:42:23 AM »
He won't come up to Carlisle because he knows a certain orange Camaro will be waiting for him and South Mountain..... :biggrin: :biggrin:

Hey Fish, you remember me telling you about three Cuda's sitting in a guys yard, down the street from me? Well after maybe more than 18 years, they are gone. Two of them were close to your body style and one looked to be a 70. don't know if someone complained and he had to get rid of them, but they are gone.


I know better than to come 900 miles just to get embarrassed by the Orange Bowtie.....    :grinyes:  You can go beat up on someone else that lives closer to you than I do....    :burnout:  I think Jason form here has a BB Dart that lives up your way....    :thumbsup:

I wonder where the old Mopars went to? I hope they found good homes somewhere...


Oh oh! The gaunlet has been thrown down!  :popcorn:  :popcorn:

Time will tell.....      :naughty:

Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #37 on: April 20, 2015 - 09:45:06 AM »
I made some more progress this weekend. I got the heads off, the wheelie bars off, and got it loaded in the trailer and delivered to our shop to finish pulling the rest of the engine.

Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline RzeroB

  • Sr. Member
  • ****
  • Posts: 1496
  • In The Lou and looking for a new (old) ride
Re: Updating the HEMI In The Beast....
« Reply #38 on: April 20, 2015 - 09:53:21 AM »
I know better than to come 900 miles just to get embarrassed by the Orange Bowtie.....    :grinyes:  You can go beat up on someone else that lives closer to you than I do....    :burnout: 

What the?! Say it isn't so Ken! The Beast is a pretty stout steed!
The Camaro can't be packing that many more ponies ... unless it's on the juice or something?
Cheers!
Tom
St Louis, MO

Former owner of 16 classic Mopars. "It is better to have owned (Mopars) and lost then to have never owned at all" (apologies to Alfred Lord Tennyson)

Offline bruce69camaro

  • Jr. Member
  • **
  • Posts: 56
Re: Updating the HEMI In The Beast....
« Reply #39 on: April 20, 2015 - 10:00:38 AM »
What the?! Say it isn't so Ken! The Beast is a pretty stout steed!
The Camaro can't be packing that many more ponies ... unless it's on the juice or something?
You would be surprised what the Camaro is packing.....and yes it does have some juice as well....

Fact is Fish and I like to have fun, his car right now would take me, even without the heads on his car... :thumbsup: :thumbsup: but my new motor might be a different story. Let's just say, the group I run with goes low 8's and they are going to be dipping into the 7's, in the quarter mile, so I hate being the odd ball.




Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #40 on: April 20, 2015 - 03:30:15 PM »
You would be surprised what the Camaro is packing.....and yes it does have some juice as well....

Fact is Fish and I like to have fun, his car right now would take me, even without the heads on his car... :thumbsup: :thumbsup: but my new motor might be a different story. Let's just say, the group I run with goes low 8's and they are going to be dipping into the 7's, in the quarter mile, so I hate being the odd ball.

I'll bet those guys you run with ain't hauling near as much weight as the Cuda......    :grinno:   I need to put her on a strict diet of Fords for a while.....    :grinyes:
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #41 on: April 22, 2015 - 01:07:15 PM »
More progress today at the shop. (Thanks Kevin)

Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline bruce69camaro

  • Jr. Member
  • **
  • Posts: 56
Re: Updating the HEMI In The Beast....
« Reply #42 on: April 22, 2015 - 01:33:02 PM »
How much does one of those completed engine weigh?

Do they make any components out of aluminum?


Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Updating the HEMI In The Beast....
« Reply #43 on: April 27, 2015 - 10:12:26 AM »
I think mine weighs about 750 carbs to oil pan. Maybe slightly less with the aluminum heads, but the crossram is heavier than the factory street Hemi's aluminum intakes.  They don't call it the "Elephant Motor" for nothing...   :grinno: 

And yes, you can buy all aluminum Hemi engines if you have deep enough pockets.....    :money:
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline bruce69camaro

  • Jr. Member
  • **
  • Posts: 56
Re: Updating the HEMI In The Beast....
« Reply #44 on: April 27, 2015 - 10:22:39 AM »
Just by looking at the size of those motors, you'd think they would weigh more just like an elephant!

A cast headed big block weighs about the same amount.