73 challenger rallye 340 car part out

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 73 challenger rallye 340 car part out  (Read 4287 times)

    Offline SilverChally

    • Sr. Member
    • ****
    • Posts: 1105
    73 challenger rallye 340 car part out
    « on: June 01, 2015 - 12:29:18 PM »
    Parting mostly complete 73 challenger rallye, original 340 auto 8-3/4 car. I'm keeping some parts for a future project, but being a 71 vert, a lot will be available that I can't use. 

    Rallye gauges/cluster,  sold

    rallye dash wiring harness, sold

    switch bezel with switches sold

    rally heater controls sold

    Bucket seats, sold

    45.6 7260 u-joint driveshaft. sold

    Ralley Side scoops sold

    72-74 Tail lights, sold

    Original pair of wiper arms/blades sold

    3 speed style wiper linkage sold

    Tie down/shipping brackets for rear rails, $50 pair shipped are pitted

    Console/shifter brackets, sold

    Slapstick, rods, shifter, etc... Mechanism will need soaked as its stucked but not real rusty, t handle does has a crack, good rods and so on. $125 shipped

    Good rear side windows, clear, regulators, tracks etc...sold

    rear glass, have clear and tinted, $100 each plus shipping

    headliner bows sold

    340 four barrel emblems sold

    exhaust manifolds sold

    I have a lot more parts too... some still not pulled, but everything listed so far is ready to go.

    PM me here or email gd1996 at yahoo dot com
    « Last Edit: March 02, 2016 - 01:59:01 AM by SilverChally »
    Logged
    70 challenger project
    68 satellite


    Offline SilverChally

    • Sr. Member
    • ****
    • Posts: 1105
    Re: 73 challenger rallye 340 car part out
    « Reply #1 on: June 16, 2015 - 11:57:31 AM »
    Updated and prices reduced
    Logged
    70 challenger project
    68 satellite

    Offline blown motor

    • Resident
    • *****
    • Posts: 3013
    Re: 73 challenger rallye 340 car part out
    « Reply #2 on: June 16, 2015 - 03:42:46 PM »
    Is the trim any good. Interested in the lower front valance, upper grill and driver's side of A post.
    Logged
    In search of the eternal buzz!

    Offline Edison1970

    • Jr. Member
    • **
    • Posts: 489
    Re: 73 challenger rallye 340 car part out
    « Reply #3 on: June 16, 2015 - 07:09:31 PM »
    How about the lower radiator support?  It's the piece that ties the 2 frame rails together under the radiator.
    Thanks
    Logged

    Offline challenger_73

    • Jr. Member
    • **
    • Posts: 444
    Re: 73 challenger rallye 340 car part out
    « Reply #4 on: June 29, 2015 - 10:00:46 AM »
    I’m looking for the passenger side drip rail molding. I’m looking for the rear piece. The piece above the quarter window. Trying to find one that has no dents or dings.also looking for the grill alumium trim and the lower front valence trim.

    challenger_73
    « Last Edit: June 29, 2015 - 10:03:35 AM by challenger_73 »
    Logged

    Offline SilverChally

    • Sr. Member
    • ****
    • Posts: 1105
    Re: 73 challenger rallye 340 car part out
    « Reply #5 on: June 29, 2015 - 10:05:13 AM »
    I do have the ds drip rail.  Need to check the condition.

    Doubt I have a good lower rad support, all my parts cars were rust buckets.

    No good on the thermoquad, had a holley on it.

    Do have some trim for the valance/grill and such, but nothing mint.
    Logged
    70 challenger project
    68 satellite

    Offline challenger_73

    • Jr. Member
    • **
    • Posts: 444
    Re: 73 challenger rallye 340 car part out
    « Reply #6 on: June 29, 2015 - 03:09:50 PM »
    Just looking for pieces without dents or dings.

    Logged

    Offline brotow

    • Full Member
    • ***
    • Posts: 826
    • There really is a Challenger in the backround
    Re: 73 challenger rallye 340 car part out
    « Reply #7 on: June 29, 2015 - 06:34:53 PM »
    Would you have an automatic transmission dipstick?
    Logged
    70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

    Offline Kenny714

    • Jr. Member
    • **
    • Posts: 18
    Re: 73 challenger rallye 340 car part out
    « Reply #8 on: July 01, 2015 - 09:23:56 AM »
    Trying to locate the hooks and brackets that hold the rear seat and backrest in. Previous owner was trying to make a drag car and cut the pieces out. Not sure if you are willing to cut them out but, I'm willing to pay for your time.
    Thanx, KENNY
    Logged
    72 Challenger
    78 Bronco
    86 Bronco
    68 M35A2
    05 Excursion

    Offline SilverChally

    • Sr. Member
    • ****
    • Posts: 1105
    Re: 73 challenger rallye 340 car part out
    « Reply #9 on: July 01, 2015 - 06:43:14 PM »
    Quote from: challenger_73 on June 29, 2015 - 03:09:50 PM
    Just looking for pieces without dents or dings.

    Yes I do have a good ds, ps is the bad one.

    I have a dipstick/tube if it pulls out without breaking like a lot seem to do.

    I don't have the rear seat stuff anymore... your a few days too late there, hauled that stuff in with scrap the other day.
    Logged
    70 challenger project
    68 satellite

    Offline brotow

    • Full Member
    • ***
    • Posts: 826
    • There really is a Challenger in the backround
    Re: 73 challenger rallye 340 car part out
    « Reply #10 on: July 04, 2015 - 01:25:12 PM »
    I would be interested in the dip stick and tube if it's for a 904.
    Logged
    70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

    Offline autobohn

    • Jr. Member
    • **
    • Posts: 4
    Re: 73 challenger rallye 340 car part out
    « Reply #11 on: July 19, 2015 - 10:02:26 PM »
    Looking for rear sway bar and brackets
    Logged

    Offline 73challenger11

    • Newbie
    • *
    • Posts: 1
    Re: 73 challenger rallye 340 car part out
    « Reply #12 on: July 21, 2015 - 04:10:38 PM »
    Do you have the brackets that the horns attach to? There are two pieces, the one that attaches to the center vertical support and the one that attaches to the bottom of the header panel. Like the ones in the picture?

    Logged
    Pages: [1]
    « previous next »