Anyone know what this is?

[twalker]

Thanks

[anlauto]

Bolts to the bottom of your automatic transmission and supports the floor shift vertical shaft.

[JayBee]

Here's a picture of the tailstock "nubs" it attaches to.

[twalker]

Thanks guys. Guess that will go in the extra parts pile.  Not needed with my tremec conversion.

[1 Wild R/T]

Not needed & that one is a C body bracket... 

[anlauto]

Not needed & that one is a C body bracket...

C Body ? How can you tell ?

[1 Wild R/T]

B & E have the tab with the studs bent the other way...

[JayBee]

twalker's sure looks like my spare and the one in my parts book. The next page over shows b-body and the studs tab the other way.

[anlauto]

I would say the one twaker posted was an E Body as well, but I'm no expert...

[Moparparts]

The one twalker has pictured is for a 71-74 E-Body the 70 E-Body is bent the other way because a 70 E uses a different vertical torque shaft and lower rod for the lock-out

[1 Wild R/T]

The one twalker has pictured is for a 71-74 E-Body the 70 E-Body is bent the other way because a 70 E uses a different vertical torque shaft and lower rod for the lock-out

That could be, I mostly have owned 70 model E bodies, my only running driving 71 was a 4 spd.. All the 72-74's I've owned were parts cars....     But FWIW C body linkage brackets also bend that way...