Dynomax VT vs Magnaflow

[AccurateExhaust]

 

[Cudaragtop]

Dynomax ultrafow welded TTI 2.5" "H" pipe 340 HP exhaust manifolds
https://www.facebook.com/photo.php?v=722761061078251&l=7939005520617217742
Be sure to hit the HD button in the lower right. It sounds the same but sure looks better.   

[HP_Cuda]

Randy

Sounds really good, no problems with decelleration and rattle eh?

I wonder if this is a hit or miss problem?

Thanks again for the sound clip,
Bryan

[burdar]

I'm using their 18 inch polished, 3in inlet and dual 2.5 outlets, factory muffler-back pipes, resonators, and tips. I have had it on for 1500 miles so far, no rattle, nice mellow tone at idle and cruising, sounds awesome when u stab some meat in the throttle.  Factory resonators make all the difference in keeping the drone under control when the MDS kicks in and drops to 4cyl

I've been going back and forth on this issue for the last few days.  Listening to all the Youtube exhaust clips, the 18" Magnaflow sounds the best to me.  I'm really worried about the MDS sound though.  Without the radio on, I can hear the MDS with the stock exhaust.  I can't make myself pull the trigger.

I took some videos of my exhaust yesterday to do a comparison if I decide to put a different muffler on.  I was shocked at how quiet the stock exhaust it.  It's actually louder inside the truck then it is on the outside.  I can't make up my mind. 

[Cudaragtop]

Randy

Sounds really good, no problems with decelleration and rattle eh?

I wonder if this is a hit or miss problem?

Thanks again for the sound clip,
Bryan

I don't have VT's Bryan. That is the sound of the Ultraflow Welded mufflers. not chambered, not valved. One step up in the loudness according to the website. They are not quiet. I do love the sound but maybe a little louder inside that I would like on a long cruise. Thinking about adding small round glass packs in front of the tips where the stock mufflers would be. May be quieter in a hard top though...

[CudamanTom]

I do like my magnaflows. 

[HP_Cuda]

Tom

Wow they sound good, can I get a video of you rev'ing those babies?

Thanks,
B

[CudamanTom]

Tom

Wow they sound good, can I get a video of you rev'ing those babies?

Thanks,
B

Sorry for the delay getting back here Bryan. I've been busy here lately.
I will try to in the next day or so. At the latest this weekend.

[HP_Cuda]

Thanks Tom

No problemo.

[CudamanTom]

Here are a couple videos.
For some reason, she's is blowing white smoke (wasn't that bad before) but will at least give an idea of how the magnaflows sound behind my 440.





Tom

[HP_Cuda]

Thanks Tom, sounded great. My VT's are coming in a few days and off to the exhaust shop.

I especially liked the thumbs up at the end!!!

 

[CudamanTom]

Thanks Tom, sounded great. My VT's are coming in a few days and off to the exhaust shop.

I especially liked the thumbs up at the end!!!

 

Thanks Bryan.
Please provide a video when you have your running. 

[HP_Cuda]

Will do.

I have a strong belief it will be quite loud.

 

[dodj]

Did you go with 2.5 or 3 inch pipes?  I seem to remember reading somewhere that 3 inch would be a benefit once you are up over 650hp.

[HP_Cuda]

2.5" for now, may see what changes I might make before going 3"

Also thinking about using square tube in the future!