Started my engine for the first time, Megasquirted stroker

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Started my engine for the first time, Megasquirted stroker  (Read 2569 times)

    Offline 74BlueFish

    • Jr. Member
    • **
    • Posts: 335
    Started my engine for the first time, Megasquirted stroker
    « on: August 02, 2015 - 11:20:06 AM »
    Yahooo!   :crazy: :jumping: :jumping: :crazy:

    Yesterday I started the engine for the first time.  Built it back in December, and took awhile to get all the accessories and stuff done.   It started in 2 revolutions.   It is only hot wired, now I need to hook the wiring to the car harness.  I still need the interior installed,  drive shaft made, and wheels and tires, so I won't be driving soon.

    Thanks for all the advice I got on the forum.  I'm so happy.  My wife videoed it and my youngest son helped me with the throttle to keep it running.

    It didn't run bad for zero tuning, now I need to learn to do some of that.   Ran better as it warmed up,  got it to 178 degrees with a 180 thermostat.  I can see all engine parameters on the laptop that is on the fender of the car.

    It's a 505 stroker with Edelbrock ProFlo intake running Megasquirt 3  , full sequential and coil near plug, open headers.
    I can't believe it started so easy.  :cooldancing:  By time time I got to the other side of the car it had oil pressure.  Two Video's  below.

    Did I already say YAHOOOOO!


    « Last Edit: August 02, 2015 - 11:26:21 AM by 74BlueFish »
    Logged
    Dan


    Offline 1 Wild R/T

    • Resident
    • *****
    • Posts: 4594
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #1 on: August 02, 2015 - 11:25:25 AM »
    Cool, It's nice when they start right away.....

    What Cam? 
    Logged
    JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
    WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
    RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
    5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

    Offline 74BlueFish

    • Jr. Member
    • **
    • Posts: 335
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #2 on: August 02, 2015 - 11:30:13 AM »
    Thanks, the cam is a Lunati  Hyd roller.

    Lunati’s Voodoo series of camshafts deliver more area under the curve than any other series of camshafts. This means more throttle response, quicker acceleration, more vacuum and better efficiency. These factors, combined with maximum horsepower and torque, make Voodoo camshafts the perfect choice for a wide range of high performance applications.Retro-Fit Hydraulic Roller. High performance street cam. Likes upgraded intake, carb and exhaust. Needs 2800 RPM stall converter in most cases. Requires 9.5:1 compression for maximum performance.

        Advertised Duration (Int/Exh): 282/290
        Duration @ .050 (Int/Exh): 231/239
        Gross Valve Lift (Int/Exh): .535/.550
        LSA/ICL: 110/106
        Valve Lash (Int/Exh): Hyd/Hyd
        RPM Range: 2200-6200
        Includes: Cam Only

    Part Number: 20230712
    Previous Part Number: 60312
    Logged
    Dan

    Offline 1 Wild R/T

    • Resident
    • *****
    • Posts: 4594
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #3 on: August 02, 2015 - 11:37:48 AM »
    Excellent choice, with a stroker it might even be a bit to mild which I honestly prefer, sounds tame but runs strong...  :thumbsup:
    Logged
    JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
    WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
    RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
    5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

    Offline roadman5312

    • Sr. Resident
    • ******
    • Posts: 5688
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #4 on: August 02, 2015 - 11:44:57 AM »
                           Awesome, sounds wicked mean.     :2thumbs:



                                                                                            :rebel:
    Logged

    Offline Strawdawg

    • Resident
    • *****
    • Posts: 2209
      • Vortex Buicks
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #5 on: August 02, 2015 - 12:12:00 PM »
    that's a great feeling!  Glad everything seems to be working :2thumbs:
    Logged

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #6 on: August 02, 2015 - 03:33:06 PM »
     :woo:  sounds great!  :2thumbs:   Nice cam!  ;)
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #7 on: August 02, 2015 - 07:00:01 PM »
    No feeling like it  :bigsmile:  :clapping:
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 74BlueFish

    • Jr. Member
    • **
    • Posts: 335
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #8 on: August 02, 2015 - 08:18:34 PM »
    Thanks Chryco,         I read a lot of your engine building posts.   I have to admit, I was a little nervous.

    Dan
    Logged
    Dan

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #9 on: August 02, 2015 - 08:29:32 PM »
    I am glad I could help then .  :2thumbs:
     I love starting engines for the first time ... nothing like it . :jumping:
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Spartan040

    • Jr. Member
    • **
    • Posts: 251
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #10 on: August 03, 2015 - 09:55:21 AM »
    Quote from: 74BlueFish on August 02, 2015 - 11:30:13 AM
    Thanks, the cam is a Lunati  Hyd roller.

    Lunati’s Voodoo series of camshafts deliver more area under the curve than any other series of camshafts. This means more throttle response, quicker acceleration, more vacuum and better efficiency. These factors, combined with maximum horsepower and torque, make Voodoo camshafts the perfect choice for a wide range of high performance applications.Retro-Fit Hydraulic Roller. High performance street cam. Likes upgraded intake, carb and exhaust. Needs 2800 RPM stall converter in most cases. Requires 9.5:1 compression for maximum performance.

        Advertised Duration (Int/Exh): 282/290
        Duration @ .050 (Int/Exh): 231/239
        Gross Valve Lift (Int/Exh): .535/.550
        LSA/ICL: 110/106
        Valve Lash (Int/Exh): Hyd/Hyd
        RPM Range: 2200-6200
        Includes: Cam Only

    Part Number: 20230712
    Previous Part Number: 60312

    Dammnn, sounds very nice. I may just have to get one of those for myself for the 440/512 I'm planning out, would this be a good cam for my purposes Chryco? Could it be custom ground to where I need it for the fuel efficiency I want to get?
    Logged

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #11 on: August 03, 2015 - 10:21:13 AM »
    Quote from: Spartan040 on August 03, 2015 - 09:55:21 AM
    Dammnn, sounds very nice. I may just have to get one of those for myself for the 440/512 I'm planning out, would this be a good cam for my purposes Chryco? Could it be custom ground to where I need it for the fuel efficiency I want to get?
    I have the same cam in my combo and am really happy with it. Just be sure to gear the car so it's spinning 2300-2500 RPM's at 65 MPH . I went with a 3:55 Dana and wished I had gotten a 3:73 instead ( OD auto 4 speed) Mine is only turning 2000 @ 65 MPH . In optimum conditions I get 17 MPG's also.
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Spartan040

    • Jr. Member
    • **
    • Posts: 251
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #12 on: August 03, 2015 - 11:00:26 AM »
    Awesome,
    Quote from: brads70 on August 03, 2015 - 10:21:13 AM
    I have the same cam in my combo and am really happy with it. Just be sure to gear the car so it's spinning 2300-2500 RPM's at 65 MPH . I went with a 3:55 Dana and wished I had gotten a 3:73 instead ( OD auto 4 speed) Mine is only turning 2000 @ 65 MPH . In optimum conditions I get 17 MPG's also.

    Awesome, maybe I'll have even more MPG with the lightened EFI engine I'm planning.
    Logged

    Offline CudamanTom

    • Resident
    • *****
    • Posts: 2670
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #13 on: August 03, 2015 - 11:05:21 AM »
    I love the sound of raw muscle.  :2thumbs: Sounds very mean.  :burnout:
    Logged
    1971 Cuda Vert 440-833 - (clone)
    1971 Cuda 440-727 - (clone)


    Because I like it fast!!!

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Re: Started my engine for the first time, Megasquirted stroker
    « Reply #14 on: August 05, 2015 - 08:08:08 AM »
    Nice! Gets me giddy, I have a 512 stroker with the same cam being built as we speak  :bigsmile:
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension
    Pages: [1] 2
    « previous next »