window regulator replacement

[gafletch]

 Is there a manual page on replacing a '70 Cuda window regulator? I'm trying to figure it out.

[73_Cuda_4_Me]

My 73's regulator is covered in the body service manual, Section 6 - Side Glass

[gafletch]

Anyone have a CD available?
 My window was stuck in the up position. Trying to get it out so there's more room to remove the regulator.
Also, where can I find the fuzzy pads that press against the glass?

[gafletch]

According to AMD, only the '70 regulator will work on the '70 Barracuda. The used one I bought has a smaller crescent gear. Has anyone tried a 71-74 in a 70 Barracuda?

[loco340cuda]

According to AMD, only the '70 regulator will work on the '70 Barracuda. The used one I bought has a smaller crescent gear. Has anyone tried a 71-74 in a 70 Barracuda?

I have and there are no issues.  The 70 does not look exactly the same as the 71-74, the 70 has more teeth but it does not use them all.  When I first put in the 71-74 reg in my 70 Cuda the window got hung up while I was rolling it up or down (I forget) and I thought I was screwed because I did not use a 70 style regulator.  It turned out it was just hanging up because the window guides had not been oiled yet.  There should be no issue except for appearance.

[gafletch]

Thanks. I guess I'll try it and see.

[mopardave]

http://www.rosevillemoparts.com/advanced_search_result.php?keywords=3581174&search_in_description=1&imageField.x=0&imageField.y=0

this is the only guide currently available.

[gafletch]

Ok guys, I have all the parts out. What steps to put it back together?

[Racer57]

Scroll through these threads. There's lots of info.

http://www.cuda-challenger.com/cc/index.php?topic=63290.0

http://www.cuda-challenger.com/cc/index.php?topic=84250.msg889426#msg889426

[solarguy]

Anyone have a CD available?

http://www.mymopar.com/index.php?pid=109