360 Manifolds - 74 Cuda

[CUDA JAS]

I am done with headers.

I want to put exhaust manifolds on my cuda (360).

I am not overly concerned with performance, and don't want to spend the $$$ on the HiPo 340 manifolds.

Is it possible to find a decent used set of factory Cuda manifolds for a 740 360, or is that like trying to find a needle in a haystack? 

How would I verify that they were correct for a 74 Cuda?

Jason

[burdar]

There should be part #'s cast on the manifolds.  Someone with a parts book should be able to give you the correct part #'s.  You might not have to look for E-body specific parts.  Other years/body styles might work...or might even be the same.  I've got a pair of 76 360 manifolds sitting on the shelf.  They were off of a Charger.

[BIGSHCLUNK]

Same as a 360 74 Charger? My computer says yes...   

[brads70]

I have a circle track buddy local that has a few sets of the 340  hi-po manifolds that he doesn't need now as they changed the rules to allow headers. I could ask him what he wants for a pair?

[CUDA JAS]

I have a circle track buddy local that has a few sets of the 340  hi-po manifolds that he doesn't need now as they changed the rules to allow headers. I could ask him what he wants for a pair?

I would certainly be interested Brad!  Thanks.

Thanks for the help guys.  I will keep an eye out at moparfest this weekend.

Jason

[Chryco Psycho]

Magnum truck manifolds are a good solution too

[Aussie Challenger]

Magnum truck manifolds are a good solution too

I was going to suggest this also having centre exit is less restrictive than the rear exit, on my Aussie Phoenix ( Plymouth Fury 2 ) I just fitted another from the other side. Should clear steering box.   

[CUDA JAS]

I was going to suggest this also having centre exit is less restrictive than the rear exit, on my Aussie Phoenix ( Plymouth Fury 2 ) I just fitted another from the other side. Should clear steering box.   

hmmm, I was wondering about that.

Got any pics.

[Aussie Challenger]

Sorry sold that car several years back, wished I hadn't but that is the story of most of us isn't it.