Fuel pump for 950 cfm carb

[mauls]

I've been researching mechanical fuel pump. Motor will be a 512 stroker with a Holley double pumper. I don't mind running a regulator if I have to.

The carter ones look to have too small of a bowl, been looking at the edelbrock ones, any suggestions

[cudabob496]

a quality mechanical that will give you 6 to 7 psi
make sure at least 3/8 inch inlet and outlet on pump, as flow
rate is just as important as pressure.

[Denison636]

What kind of horse power will you be making

[Denison636]

You want to make sure you have the right size line to. I am going threw this on my build. I am going to switch to electric fuel pump and call it done.

[Chryco Psycho]

Depends on use most mechanical 110 GPH pumpcan keep up for a while but on a long pull more then a 1/4 mile for ex you could go lean , if you want electric the Mallory 110 is awesome & quiet

[Plum Crazy 71]

I'm will be using Aeromotives Phantom fuel pump for my 472 Hemi with 2 - 750 Holleys. 

[Oldschool]

I have been running this pump for years with zero issues in my 528" Hemi pushing 800 HP. This pump feeds 2 - 750 Holley HP's through a regulator set at 6.5 psi.

http://www.summitracing.com/ga/parts/msd-29259

 

[HP_Cuda]

Depends on use most mechanical 110 GPH pumpcan keep up for a while but on a long pull more then a 1/4 mile for ex you could go lean , if you want electric the Mallory 110 is awesome & quiet