Author Topic: 440-6 fuel injection  (Read 4247 times)

Offline r15303

  • Jr. Member
  • **
  • Posts: 354
440-6 fuel injection
« on: September 21, 2015 - 02:56:48 PM »
anyone have any advice on a fuel injection system for a 440-6?  don't know who makes one.  FAST, Holly, any guidance is appreciated.  1970 440-6 challenger convertible.   :1zhelp:




Offline YellowThumper

  • Sr. Member
  • ****
  • Posts: 1633
  • I left the snow for this?
Re: 440-6 fuel injection
« Reply #1 on: September 21, 2015 - 04:10:15 PM »
There are several very informative current threads right here discussing same questions you have posted.
Removing the warning labels one at a time.
Nature will take care of the rest.

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: 440-6 fuel injection
« Reply #2 on: September 21, 2015 - 04:19:33 PM »
I run the F&B unit. Very nice and I have been running it three years with no issues, I also run the FAST ECU. I can't post pictures from work, so I will when I get home.  As stated, there are some good threads on this topic already.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: 440-6 fuel injection
« Reply #3 on: September 21, 2015 - 11:37:08 PM »
I have the SB version, very nice unit but definitely not cheap. I have yet to get my car running so I cannot comment on how well it works.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline GreenFish

  • Sr. Member
  • ****
  • Posts: 1281
Re: 440-6 fuel injection
« Reply #4 on: September 24, 2015 - 12:57:01 PM »
70 cuda, 440, KB pistons, 10.5:1 compression, edlebrock heads,RacerBrown cam, 5-Speed Tremec, Megasquirt EFI

Offline daryld

  • Jr. Member
  • **
  • Posts: 125
Re: 440-6 fuel injection
« Reply #5 on: March 31, 2017 - 02:11:45 PM »
Thinking about going with F&B too. Can you tell me how much it cost you all in? I am assuming to changed your gas tank too. Also, how difficult was the install?

Thanks,

I run the F&B unit. Very nice and I have been running it three years with no issues, I also run the FAST ECU. I can't post pictures from work, so I will when I get home.  As stated, there are some good threads on this topic already.
Daryl

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: 440-6 fuel injection
« Reply #6 on: March 31, 2017 - 03:15:51 PM »
Thinking about going with F&B too. Can you tell me how much it cost you all in? I am assuming to changed your gas tank too. Also, how difficult was the install?

Thanks,

I have both a BB and SB system (only the BB system is up and running). As for cost, it is going to depend on what you decide to use for a ECU/Harness system and how you are going to do your fuel system. That said, my BB system cost me around $7K all in; I am using a Holley HP ECU and harness system, MSD distributor, MSD 6AL ignition w/coil, tanks Inc gas tank with in tank pump, new 1/2 aluminum fuel lines, replaced the alternator to a 90 Dakota 120 amp (you will need it for the ECU and ignition) and a number of other "bits".

They are awesome systems but it is not "plug and play", you will definitely need to educate yourself on EFI, tuning, etc. (doing that as we speak). If you are a "car guy" and grew up with carbs and such, there is a fairly steep leaning curve but nothing that you cannot overcome through google and forums such as this. Holley has a pretty good forum to help and there are a number of members here who are good with EFI.

Not really for the faint of heart but worth the effort, my car never idled as well as it does with EFI and tuning is done with a laptop.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 440-6 fuel injection
« Reply #7 on: April 12, 2017 - 11:52:44 AM »
 pieced a system together using parts from various suppliers  & it works very well
 Total cost was $4500
« Last Edit: June 30, 2017 - 09:15:58 PM by Chryco Psycho »

Challenger - You`ll wish You Hadn`t

Offline daryld

  • Jr. Member
  • **
  • Posts: 125
Re: 440-6 fuel injection
« Reply #8 on: June 02, 2017 - 03:50:17 PM »
Fitech has received a lot of good reviews and is super cheap in my opinion. They do not offer a 6 pack set up but you can run two fours. I am actually starting to lean towards a Gen 3 Hemi swap. I believe this will bring my car more value in the event I want to sell one day. Good luck.
Daryl

Offline ragtopdodge

  • Resident
  • *****
  • Posts: 4065
Re: 440-6 fuel injection
« Reply #9 on: January 05, 2018 - 01:59:45 PM »
THey do now.
'70 318-auto Chally 'vert
'71 383-auto 'Cuda 'vert (sold)
06 300c SRT8
04 2500 QCLB 4x4 HO