Did all 440 SIX PACK cars came with HEMI transmission?

[andben]

Well, did they? If you order a 4 speed 440 six car. Did it came with the 18 spline hemi transmission?

[anlauto]

Yes

[GreenFish]

and if my memory serves me right, the 4 speeds had Dana 60 rears as well.

[js29no]

and if my memory serves me right, the 4 speeds had Dana 60 rears as well.

[1 Wild R/T]

And 4 speed equipt 440 Magnums got the 18 spline & Dana too...

[69ChargerRT]

was going to come in here and answer one of the few questions I know for sure, but looks like its been covered!

[Oldschool]

was going to come in here and answer one of the few questions I know for sure, but looks like its been covered!

Ha Ha...  That happens to me all the time here...       I guess I am old and slow. Or maybe we just have an awesome group of helpful folks here...   

[jordan]

Did the automatic cars come with a Dana?  Is there a hemi 727?

[71gogreen]

Did the automatic cars come with a Dana?  Is there a hemi 727? yes,It was called The Super Track Pack. I believe the Hemi trans was a little beefer?

[70chall440]

AT cars didn't come with a Dana; however there is a HD AT trans for the 440, 440-6 and Hemi

[rUNCHARGER]

Dana 60 was optional on 69-71, automatic, Hemi and 440's with the 4.10 axle package.

Sheldon

[Chryco Psycho]

The Dana was always optional , but was only std with the 440+6 4spd & Hemi , I have heard of one car with a small block & Dana for towing .
Auto 440+6 & Hemi had 8 3/4 std but with optional Dana  the Auto /727 was much heavier internally with 4 gear planetaries & other heavier parts

[1 Wild R/T]

The Dana was always optional , but was only std with the 440+6 4spd & Hemi , I have heard of one car with a small block & Dana for towing .
Auto 440+6 & Hemi had 8 3/4 std but with optional Dana  the Auto /727 was much heavier internally with 4 gear planetaries & other heavier parts

Not quite correct.... Dana wasn't always optional, it could only be had with a 440 or 426 engine... It was standard  equipment with 440-4bbl, 440-6bbl or 426 Hemi when equipped with a 4 spd.....  It was an optional axle with 440-4bbl, 440-6bbl or 426 Hemi equipped with an auto but that was triggered by the 4.10 gear ratio...

All 440 HP autos got four pinion planetaries, Most 4bbls & all 6bbls & Hemis got the wide "Hemi" front drum which accepts more frictions & steels plus it's designed to allow the double wrap band....

340 with a Dane never happened from the factory...  I'm sure plenty got put in after the fact...

[Chryco Psycho]

Except that Mopar would build you virtually anything you wanted & I do know of a documented small block dana car built with a towing pkg

[70chall440]

of course since you used the "N" word (never) you know there is a deluge of posts coming swearing they had one, talked to someone who had one, knew someone who had one... (meaning Dana in a non 440/426 car). I don't know if you could get it or not, but I have come to learn that when it comes to Mopar, never say never... I think dealer installed stuff plays a huge role in all of the controversy and misinformation. I remember as a young aspiring Mopar fan in the early 1970's that our local Mopar dealer was known for ordering about anything and if he couldn't order it, they would make it through the parts department. Knew a guy who ordered a 70 440+6 Roadrunner; when the car came in it had a 4BBL but the dealership ordered and installed all of the 6 pack stuff. Of course no one back then cared about codes, VINs, etc.