Author Topic: Source for 1 cavity spade connector?  (Read 1454 times)

Offline dakota

  • Full Member
  • ***
  • Posts: 585
Source for 1 cavity spade connector?
« on: December 02, 2015 - 06:27:24 AM »
I've been replacing some wiring.   There are a couple of places where these 1 cavity spade connectors are used such as on the power supply the a/c compressor and the heater blower.  I'd like to get new connectors, but I haven't been able to find a source that has the same type.   Suggestions?




Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: Source for 1 cavity spade connector?
« Reply #1 on: December 02, 2015 - 08:32:46 AM »
Maybe try Evans Wiring. I've seen his swap display which included pieces and parts but whether he has that exact connector you'd have to ask.
http://www.evanswiring.com/default.htm
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Source for 1 cavity spade connector?
« Reply #2 on: December 02, 2015 - 09:16:55 AM »
some of these look familiar...not seeing the exact one you pictured

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010#Categories


this ones close http://terminalsupplyco.com/Store/Product.aspx?pc=2977763

« Last Edit: December 02, 2015 - 09:18:31 AM by Bullitt- »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline dakota

  • Full Member
  • ***
  • Posts: 585
Re: Source for 1 cavity spade connector?
« Reply #3 on: December 03, 2015 - 05:57:50 AM »
Maybe try Evans Wiring.
http://www.evanswiring.com/default.htm


Thanks for the referral Jay Bee.   I sent a note to the email address on their website and got a reply within a couple of hours.   They have them in stock for $1 each.

Offline YellowThumper

  • Sr. Member
  • ****
  • Posts: 1633
  • I left the snow for this?
Re: Source for 1 cavity spade connector?
« Reply #4 on: December 07, 2015 - 05:25:33 PM »
If that doesn't work for you.  I purchased some that were the xact same from a local electronic store out he r in SoCal. Orvac electronics.  If needed. Pm me and I will check out what the brand was.

Mike
Removing the warning labels one at a time.
Nature will take care of the rest.

Offline dakota

  • Full Member
  • ***
  • Posts: 585
Re: Source for 1 cavity spade connector?
« Reply #5 on: December 07, 2015 - 06:12:28 PM »
Mike - thanks for the offer.   I just received the package from Evans today.   There's a little difference in the shape of the connector, but I think they should work.   If they don't, I'll give you a shout.