2-Speed Wiper Motor Question

[hjeades]

I have some how misplaced the ballast resistor for my 2-speed wiper motor. Can someone with this type of motor ohms the resistor and post the measuerment so I can get a new one. If it has a part number on it that would be awesome too. Thanks for any info you can help me with.

[70chall440]

I believe it is a standard 2 pole BR; any auto parts store will have one.

[BlackACR]

This is what you are looking for?

[70chall440]

yep, you should be able to get one at any parts store sans the mount.

[hjeades]

This is what you are looking for?

Yes thats the one. Is that yours can you ohms it for me? I have been to several parts stores NAPA, O'Rielly, Car Quest and they all say the same thing tell me what the ohms is and we can get you one. I appreciate the replies guys thanks.

[BlackACR]

Yes thats the one. Is that yours can you ohms it for me? I have been to several parts stores NAPA, O'Rielly, Car Quest and they all say the same thing tell me what the ohms is and we can get you one. I appreciate the replies guys thanks.

That's one I restored, but I should have one around, let me check.

[JayBee]

I have 2 of those motors w/resistors. Here's what I got. First I shorted the DVM's leads and got .8 ohms. Then measured the resistors and they both read 1.3 ohms, so I'd say they're 1/2 ohm. I'd be curious if that's what BlackACR gets too.

[HP_Cuda]

I just measured .8 Ohms resistance.

[BlackACR]

I have 2 of those motors w/resistors. Here's what I got. First I shorted the DVM's leads and got .8 ohms. Then measured the resistors and they both read 1.3 ohms, so I'd say they're 1/2 ohm. I'd be curious if that's what BlackACR gets too.

Found an old one, got 2  different reading from the same one 1.1 then .8   

[hjeades]

Awesome thanks eveyone! I really appreciate it!