who has espo leafs +1 and +2

[TelisSE440]

That's our luck RUNCHARGER ! Or bad luck for that matter... 

[rUNCHARGER]

Yes: My orange car has factory HP springs and it sits like your car, I'm happy with it. On my green car though I have tried two pair of factory HP springs and they both must have been re-arched. I put the lower set in but it's still too high. When I finally get the car done and it still sits high I'm going to load some weight in the back of it and hopefully they'll sag a bit. I still have to add the rear seat, rear window and spare tire too it but I don't think that will bring it down the 4 inches it sits too high.

Sheldon

[Jousi]

Espo springs, I asked them to make those with T/A specs + 1".
Tires: 235/60 and 275/60.

[TelisSE440]

Espo springs, I asked them to make those with T/A specs + 1".
Tires: 235/60 and 275/60.

  This is just want i want, Jousi. Cool car by the way! With how many leafs did you have them built ? Have the settled until now?

[dodj]

Yes: My orange car has factory HP springs and it sits like your car, I'm happy with it. On my green car though I have tried two pair of factory HP springs and they both must have been re-arched. I put the lower set in but it's still too high. When I finally get the car done and it still sits high I'm going to load some weight in the back of it and hopefully they'll sag a bit. I still have to add the rear seat, rear window and spare tire too it but I don't think that will bring it down the 4 inches it sits too high.

Sheldon

I have factory XHD springs and the car sat too high for my liking at first. Kind of high like the way TelisSE440 is looking for-but not 4"! It took a couple years for them to settle in the way I like it. They are virtually flat at the moment and it wouldn't bother me to be a bit lower. I like corners as much as straights. 

[Jousi]

This is just want i want, Jousi. Cool car by the way! With how many leafs did you have them built ? Have the settled until now?

Thanks!
If I remember right those got 5 leafs, or you can say 4 full and one short, like an original TA/AAR spring.
Before resto it had XHD and airshocks, plus scarred and dented mufflers
They settled a bit after that pic, here is one some 6 months after:

[dodj]

You drive that car in open pit mines?!?!?
 

[74challenger03]

Thanks guys wish I could see a car with + 2 inch . Brad still have your espo,s? Do the 275/60 fit with no problem?

[brads70]

Thanks guys wish I could see a car with + 2 inch . Brad still have your espo,s? Do the 275/60 fit with no problem?

Sorry no I gave them to Andy. http://www.cuda-challenger.com/cc/index.php?topic=99711.0
I have never tried 275/60/15 on mine but I see many others have ....

[Jousi]

You drive that car in open pit mines?!?!?
 

Sure, luckily there were no water that time

[dodj]

Thanks guys wish I could see a car with + 2 inch . Brad still have your espo,s? Do the 275/60 fit with no problem?

A 275/60 should fit with no issues no matter what spring you have 74Challenger03. The rim/backspace will be the important dimension to worry about. 

[74challenger03]

I have the norm 3.5 backspace police rims.

[dodj]

Well a 275 requires an 8" rim I believe. Aren't 3.5" BS rims a 7" wide rim?

[74challenger03]

gonna check my rim,thanks Dodj for pointing that out. Called ESPO and the lady was great and knew her stuff. Wished I new about them before I bought the leafs from Summit. Live and learn.

[TelisSE440]

I was wondering, should there be 5 or 6 leafs. Is there a huge difference?