Progress on the 318 is comin slowly but surely...

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Progress on the 318 is comin slowly but surely...  (Read 1358 times)

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Progress on the 318 is comin slowly but surely...
    « on: June 03, 2005 - 05:14:13 PM »
    Well up to about a month ago i had not done a THING to my motor since november when i bought the car.....except for plug change, wires, etc etc...

    Gettin ready to do a Heads (360 J-Heads 2.02valves, milled to 56cc chambers, adj roller rockers), Intake (performer rpm, milled-matched to the heads), and Cam change (http://www.compcams.com/Technical/Search/CamDetails.asp?PartNumber=20-311-4). I've gathered most of the parts and im VERY close to getting this motor modded one weekend.

    So in a month i've gotten my exhaust/headers put in, my Mopar Performance Electronic Ignition w/MSD Blaster coil and Heli-Core wires and thats it so far. I need to get the right valve springs in the heads, new hoses, and the 4bbl kickdown linkage.

    Can't wait to get it together, just put the mopar valve covers on (have the matching air cleaner when i put the 4bbl on).

    So to avoid getting the  :worthless: smilie i included a few  :dogpile:

    Exhaust - 2.5" Super 40series Flowmasters, dumped




    Motor - Before


    Motor - Yesterday



    I try and keep it somewhat clean under there for being a daily driver. Put about 15k miles on it since November..

    Pic i took with my heads, intake, carb, v/cs  & air cleaner on a table, should make it look pretty clean IMO


    What do ya think? I plan on some 3.73s or 3.91s with a suregrip after the motor work is done, after that i gotta budget a tranny rebuild/shift kit/ TQ converter...which i have a 3000stall i can use...

    -Goody :burnout:
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link


    Offline Mopar73340

    • Sr. Member
    • ****
    • Posts: 1130
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #1 on: June 03, 2005 - 05:23:10 PM »
    Looks SCHWEEEEET Mike, keep up the good work... :thumbs: :thumbs: :thumbs: :burnout: :burnout:
    Logged
    73-Challenger 340 727/GearVendors Auto
    73-Challenger 408 Pistol-Grip 5-speed

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #2 on: June 03, 2005 - 05:27:19 PM »
    Looks great!!!  :thumbs: :thumbs: :thumbs:

      Do you really want 3:73's or 3:91's for a daily driver????


      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #3 on: June 03, 2005 - 05:42:27 PM »
    Quote from: MEKrunner on June 03, 2005 - 05:27:19 PM
    Looks great!!!  :thumbs: :thumbs: :thumbs:

      Do you really want 3:73's or 3:91's for a daily driver????


      Mike

    Thanks guys

    I think i do, i dont do much highway driving..if i got a chunk w/3.55s i wouldnt change it but im leaning twords 3.73s if i get the right case for it. I didnt buy the car for gas mileage so I honestly wouldnt mind the lower MPG for the extra getup..If anything, if im playing to go to california or somethin i can swap 3rd members for the 2.76s....

    I'm not doin too bad figuring i got a lot of the stuff for free otherwise i wouldnt even be able to afford it, lots of generous locals that have helped me out...

    So far:
    Heddman Headers - Free, had to pick em up
    Mufflers + Install - $147 for the mufflers shipped, $200 hang/plumbing..not bad
    Heads - Free - Paid $100 or so to get em MagnaFluxed and cleaned
    Intake - Free - Paid to media blast it
    Rebuilt Carter Comp Series 4bbl - Free, my dad had it in the garage
    Mopar Performance Distributor and ECU - Free - Had to get wiring from junkyard
    Chrysler Mini-Starter - Free

    Other than that everything ive bought and have to buy will total around $800-900..which isnt bad at all for a h/c/i swap and a couple pieces of eye candy  :beer:
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link

    Offline RusTy/SE

    • Sr. Resident
    • ******
    • Posts: 5456
    • Just havin' fun
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #4 on: June 04, 2005 - 12:06:00 AM »
     Nice and clean Goody :thumbs:

     I'm about to get an eddy Performer 1406 for my 73 which already has a Performer intake and X-heads. Could you snap a close up of the linkage side, as i expect i'll need the Chrysler linkage adapter. Does yours have it (the linkage adapter)?
    Logged
    Russ
    2001 Durango     1B4HS
    1970 Challenger  JS29U
    Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
    Member since December 13, 2002

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #5 on: June 04, 2005 - 01:00:19 AM »
    Quote from: twofornow on June 04, 2005 - 12:06:00 AM
    Nice and clean Goody :thumbs:

     I'm about to get an eddy Performer 1406 for my 73 which already has a Performer intake and X-heads. Could you snap a close up of the linkage side, as i expect i'll need the Chrysler linkage adapter. Does yours have it (the linkage adapter)?

    Well i havent even bought the kickdown for the 4bbl setup yet. Thats on my list, ill be using a carter carb so ill do a test fit kinda, to see if i need some sort of adapter. When i did the kickdown on my dart w/a holley they said to get the adapter....didnt use it...its sitting in my garage  :dontknow:

    -Goody
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link

    Btch n Blue

    • Guest
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #6 on: June 04, 2005 - 05:17:32 PM »
    You're best bet would be a Lokar kickdown setup...they're only about $50 bucks and hook up and adjust REAL easily!! :thumbs: :drool:
    Logged

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Progress on the 318 is comin slowly but surely...
    « Reply #7 on: June 05, 2005 - 04:10:15 PM »
    Quote from: B*tch 'n Blue on June 04, 2005 - 05:17:32 PM
    You're best bet would be a Lokar kickdown setup...they're only about $50 bucks and hook up and adjust REAL easily!! :thumbs: :drool:

    I'm thinking about it...have you used it? I'm not sure how it would mount on the intake, i know there are brackets that are availible that accept the Lokar Throttle/Kickdown but those are like $50 too....idk if i wanna spend $150 on a bracket, lokar kickdown, and lokar throttle cable....rather put it twords spring relocation and some body color steelies  :dogpile:
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link
    Pages: [1]
    « previous next »