Hydroboost master cylinder

[jimmycuda71]

I am installing a astro van hydroboost on my cuda.  The astro van master cylinder is not the best looking thing. Does anyone know of a reasonably priced alternative? Maybe something chrome if anyone makes one.

Thanks  jimmycuda71

[brads70]

I am installing a astro van hydroboost on my cuda.  The astro van master cylinder is not the best looking thing. Does anyone know of a reasonably priced alternative? Maybe something chrome if anyone makes one.

Thanks  jimmycuda71

I also have the astro van hydraboost ( not installed yet) I'm considering this?    http://www.wilwood.com/MasterCylinders/MasterCylinderProd.aspx?itemno=261-13270-P

[dave73chally]

I bookmarked this one from soundcontrols build:

http://m.summitracing.com/parts/wil-260-8556p

Brad, I think it's the same one but not the kit version?

[jimmycuda71]

I bookmarked this one from soundcontrols build:

http://m.summitracing.com/parts/wil-260-8556p

Brad, I think it's the same one but not the kit version?

will this work with  drums in the back?

[brads70]

I bookmarked this one from soundcontrols build:

http://m.summitracing.com/parts/wil-260-8556p

Brad, I think it's the same one but not the kit version?

Yes I think it is too.

[brads70]

will this work with  drums in the back?

You might need a residual pressure valve? 
http://www.wilwood.com/MasterCylinders/MasterCylinderValves.aspx

[jimmycuda71]

Has anyone tried this on there hydroboost?  Is a lot less than a wilwood.

http://www.summitracing.com/parts/rsd-dbmc09c/overview/

[YellowThumper]

FYI I looked at many hydroboost systems at local salvage yards and found they all appeared to have been produced by the same supplier. Dodge, Chevy and Ford. So it may be possible another brand would also fit. Take the ugly cylinder to local parts store and compare it to a few. Bolt pattern, there is a locating bore diameter and the push rod contact distance.

Mike

[Cudakiller70]