News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: On to the next project - steering pump rebuild  (Read 5623 times)

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    On to the next project - steering pump rebuild
    « on: March 09, 2016 - 07:51:46 PM »
    Well, now my box is done, on to the pump..it was leaking.

    So any tips on getting the reservoir off the pump...this sucker is really on there.






    I have tapped it quite a bit and it does not seem to want to move.

    Jason


     
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!


    Offline dakota

    • Full Member
    • ***
    • Posts: 585
    Re: On to the next project - steering pump rebuild
    « Reply #1 on: March 09, 2016 - 09:24:35 PM »
    Logged

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: On to the next project - steering pump rebuild
    « Reply #2 on: March 09, 2016 - 09:48:03 PM »
    Quote from: dakota on March 09, 2016 - 09:24:35 PM
    Some references if you're interested:

    http://www.cuda-challenger.com/cc/index.php?topic=111260.msg1096790#msg1096790


    Thanks man.  Any tips on getting the reservoir off??

    Jason

    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline 73440

    • Sr. Member
    • ****
    • Posts: 1826
    Re: On to the next project - steering pump rebuild
    « Reply #3 on: March 09, 2016 - 10:01:59 PM »
    Quote from: CUDA JAS on March 09, 2016 - 09:48:03 PM
    Thanks man.  Any tips on getting the reservoir off??

    Jason

    What FSM says is remove the two mounting studs and the pressure hose fitting , then tap filler tube with plastic hammer to remove the resorvoir. Maybe the mounting studs thread into the housing assembly.
    Logged
    67 440
    72 413 / 727
    73 Barracuda w/ 68 440
    65 Plymouth Fury III , I sold ,was my Nana's car till 92 yo.
    51 Ford F1 239 Flathead, flipped , new cab , stolen
    59 BelAir 283 4 door original patina
    01 Chevy van 420, 520 miles
    06 Crown Vic Police Interceptor
    75 HD Ironhead converted to RH shift
    73 HD Ironhead
    82 HD Ironhead
    74 Norton 850
    80 HD Shovelhead
    80 Husqvarna WR 390

    Offline dakota

    • Full Member
    • ***
    • Posts: 585
    Re: On to the next project - steering pump rebuild
    « Reply #4 on: March 09, 2016 - 10:45:44 PM »
    Quote from: CUDA JAS on March 09, 2016 - 09:48:03 PM
    Thanks man.  Any tips on getting the reservoir off??

    Jason

    Go to the 2:00 minute mark on this YouTube video:

    https://m.youtube.com/watch?v=c5RaNn-fkQo

    Logged

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: On to the next project - steering pump rebuild
    « Reply #5 on: March 11, 2016 - 09:59:25 AM »
    Quote from: dakota on March 09, 2016 - 10:45:44 PM
    Go to the 2:00 minute mark on this YouTube video:

    https://m.youtube.com/watch?v=c5RaNn-fkQo

    Thank you sir...that is pretty slick...it did not work for me...but it's pretty slick.

    I currently have mine sitting in some vinegar hoping it will loosen some of the rust that seems to be holding it together.

    Jason
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: On to the next project - steering pump rebuild
    « Reply #6 on: March 11, 2016 - 01:32:57 PM »
    I have always intended to get a PS pulley puller but never have; back on my list  :bigsmile:
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: On to the next project - steering pump rebuild
    « Reply #7 on: March 11, 2016 - 02:16:58 PM »
    Quote from: 70chall440 on March 11, 2016 - 01:32:57 PM
    I have always intended to get a PS pulley puller but never have; back on my list  :bigsmile:

    I had no trouble with eh pully...it comes out just fine.

    I can not get the pump body out of the reservoir!!

    Jason
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: On to the next project - steering pump rebuild
    « Reply #8 on: March 11, 2016 - 02:27:06 PM »
    what puller did you use?

    I have used the same technique as shown in the video several times with success. Also have tried tapping around the outer edge first to try and break it free.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: On to the next project - steering pump rebuild
    « Reply #9 on: March 11, 2016 - 02:41:01 PM »
    Hit it with a hammer !
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: On to the next project - steering pump rebuild
    « Reply #10 on: March 11, 2016 - 02:58:19 PM »
    Quote from: anlauto on March 11, 2016 - 02:41:01 PM
    Hit it with a hammer !

    OH I HAVE!!!

    If and when I do get it off, I will have to straighten the edge of the reservoir.

    Quote from: 70chall440 on March 11, 2016 - 02:27:06 PM
    what puller did you use?

    I have used the same technique as shown in the video several times with success. Also have tried tapping around the outer edge first to try and break it free.

    No puller.  Mine has the pulley with a nut...no not me...the other kind of nut.

    Jason
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: On to the next project - steering pump rebuild
    « Reply #11 on: March 11, 2016 - 03:04:45 PM »
    Hit it with a bigger hammer.....

    Plug all the holes but one, and hit it with air pressure... :dunno:
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline YellowThumper

    • Sr. Member
    • ****
    • Posts: 1633
    • I left the snow for this?
    Re: On to the next project - steering pump rebuild
    « Reply #12 on: March 11, 2016 - 06:06:57 PM »
    Quote from: anlauto on March 11, 2016 - 03:04:45 PM
    Hit it with a bigger hammer.....

    Plug all the holes but one, and hit it with air pressure... :dunno:

    VERY BRIEFLY. and wear disposibles...
     :grinyes:
    Logged
    Removing the warning labels one at a time.
    Nature will take care of the rest.

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: On to the next project - steering pump rebuild
    « Reply #13 on: March 12, 2016 - 07:28:37 AM »
    Man was that sucker in there!!!

    BFH did the trick.



    I used the jaws of my vice to support the reservoir on both sides which allowed me to pound a little harder...I needed to.  Bit of a pucker factor!!

    Bent the lip a little...



    I taped it all back so it looks better.

    There is a little bit of rust under the o-ring of the pump body.



    little in the lip of the reservoir too.



    I have the reservoir sitting in a bit of vinegar to get rid of the rust.

    The pump, I will just it with a wire wheel.

    here are the guts.



    Next week a little prep for paint a reassembly...I hope, work is getting busy.

    Jason


    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: On to the next project - steering pump rebuild
    « Reply #14 on: March 12, 2016 - 08:34:33 AM »
    All those blades have to go back it a certain way :2cents:
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com
    Pages: [1] 2
    « previous next »