Exhaust cut-outs

[shatar4]

I am ready to put the exhaust back on but want to put cut-outs on (cool factor) but have no idea what is the best. I know every one has something the other doesn't but I thought I would check with "real world" people on what they are using. TIA

[brads70]

I have no experience but was considering a T/A style exhaust that worked off cutouts. From my online research it sounds like Dougs design are the most durable?
 http://www.summitracing.com/int/parts/dou-dec250ak/overview/
http://www.summitracing.com/int/search/department/exhaust/section/cutouts/brand/dougs-headers?N=4294948820%2B4294948799%2B401098&SortBy=Default&SortOrder=Ascending&retaillocation=int

The other brands/style seems like the motors don't last very long due to heat I'd guess?
Hope that helps?

[roadman5312]

I have no experience but was considering a T/A style exhaust that worked off cutouts. From my online research it sounds like Dougs design are the most durable?
 http://www.summitracing.com/int/parts/dou-dec250ak/overview/
http://www.summitracing.com/int/search/department/exhaust/section/cutouts/brand/dougs-headers?N=4294948820%2B4294948799%2B401098&SortBy=Default&SortOrder=Ascending&retaillocation=int

The other brands/style seems like the motors don't last very long due to heat I'd guess?
Hope that helps?

                                  We put the Dougs on the Challenger based on the fact I installed a set on a 57 Chevy a couple years ago.  He uses them every chance he gets , never  a problem.    And the knife edge design is leak proof.      Highly recommend. 

[shatar4]

What scares me are the reviews those are getting on Summit. They don't seem to last that long.

[brads70]

What scares me are the reviews those are getting on Summit. They don't seem to last that long.

Just read them , I agree that would scare me off too. 

[dave73chally]

Ive read and heard good things about qtp?

[onebadfish]

I have Doug's on my Cuda. I just put them on so don't have any feedback on how they will work however my buddy put some on his Coronet and has run them for 3 years. He did have some issues with one jamming up but tore it down and tightened up all the screws and used locktight and haven't had an issue since!