Help please before I order TTI headers. Ebody adjustment off

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Help please before I order TTI headers. Ebody adjustment off  (Read 2815 times)

    Offline Cuda4u

    • Jr. Member
    • **
    • Posts: 43
    Help please before I order TTI headers. Ebody adjustment off
    « on: March 19, 2016 - 02:29:45 PM »
    Ready to purchase TTI exhaust from headers back. I'm checking measurements and I'm off what TTI installation spec is.
    This is 1970 cuda ebody 440 six pack clone. Originally 318 before complete rebuild and before I bought it.

    Center of crank to passenger side k frame / Center crankshaft to driver side k frame should be offset 2.5". I have 2.17" TTI says header will not fit on drivers side if this spec is not correct
    I enclosed a pic of engine mount passenger side and one on driver side( dipstick)
     Abit confused on how I would shim this over more to passenger side.
     The Center of crank to top of k frame is 4.9" and should be 5.25"
    Thanks in advance to the technical folks that answer these questions
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #1 on: March 19, 2016 - 11:53:44 PM »
    you must have poorly made brackets or cheap mounts made at the wrong spec
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #2 on: March 20, 2016 - 10:40:52 AM »
     :iagree:  Great time to buy mag-mounts from Mancini!  :2thumbs:
    Logged

    Offline Cuda4u

    • Jr. Member
    • **
    • Posts: 43
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #3 on: March 21, 2016 - 08:29:01 PM »
    Glad I measured first. Looking at Mancini.
    Thanks
    Logged

    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #4 on: March 23, 2016 - 10:01:28 AM »
    It looks like, at least on one mount, there have been repairs. If these have been pounded or cracked and repaired, they could be dimensionally off.
    Logged

    Offline Cuda4u

    • Jr. Member
    • **
    • Posts: 43
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #5 on: March 24, 2016 - 09:32:04 PM »
    I will order front mounts complete. Looks like Mancini is the best quality
    Logged

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #6 on: March 25, 2016 - 08:09:29 PM »
    Where did you get the specs...I would like to check mine too!
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!

    Offline Cuda4u

    • Jr. Member
    • **
    • Posts: 43
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #7 on: March 25, 2016 - 08:30:11 PM »
    I got the specs from TTI Performance. They have it on their website and I also talked to them on phone. Nice company to talk to.
    Logged

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #8 on: March 25, 2016 - 08:32:13 PM »
    Quote from: CUDA JAS on March 25, 2016 - 08:09:29 PM
    Where did you get the specs...I would like to check mine too!


    From the center of the crankshaft to the top of the K
    -
    frame, the correct distance is 5
    -
    1/4
    ”
    .
    The engine is also
    offset  towards  the  passenger
    -
    side.
    Measure  from  the  center  of  the  cra
    nkshaft  to  each  frame  rail.  The
    difference should be 2
    -
    1/2
    ”
    .
    from their websight instrunctons for small block e-body
    http://www.ttiexhaust.com/PDF/II-TTI340BE17835.pdf
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline CUDA JAS

    • Resident
    • *****
    • Posts: 2292
    • vroooooom!
    Re: Help please before I order TTI headers. Ebody adjustment off
    « Reply #9 on: March 25, 2016 - 08:57:30 PM »
    Thanks guys...I will see how close I am.

    Jason
    Logged
    74 'cuda 360/727



    Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

    Just call me a gearhead!
    Pages: [1]
    « previous next »