Author Topic: Shaker bubble  (Read 3294 times)

Offline schtick

  • Jr. Member
  • **
  • Posts: 73
Shaker bubble
« on: March 26, 2016 - 11:35:32 AM »
I'm thinking that it's a shame not to show the whole engine at some shows. Share your thoughts on removing the shaker bubble at car shows.




Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Shaker bubble
« Reply #1 on: March 26, 2016 - 11:36:49 AM »
Usually a lot of work, but I agree...if you got nice carbs...show them off !

Your center carb is "good" :smilielol:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline schtick

  • Jr. Member
  • **
  • Posts: 73
Re: Shaker bubble
« Reply #2 on: March 26, 2016 - 11:42:48 AM »
Usually a lot of work, but I agree...if you got nice carbs...show them off !

Your center carb is "good" :smilielol:
Ha. Thanks for reminding me about that. I replaced a cracked metering block recently. Forgot to wipe that off.

Offline schtick

  • Jr. Member
  • **
  • Posts: 73
Re: Shaker bubble
« Reply #3 on: March 26, 2016 - 11:47:35 AM »
At Carlisle during the A12 reunion, I noticed a lot of people used a cool strut system to hold the hood up and display the engines. Very cool. Just wondering if leaving the carbs exposed all day might invite  unwanted stuff in the carbs. 

Offline rUNCHARGER

  • Sr. Member
  • ****
  • Posts: 1169
Re: Shaker bubble
« Reply #4 on: March 26, 2016 - 01:07:34 PM »
I love shakers all right. However the worst thing about them (other than taking them on and off) is the way they hide the engine.

Sheldon

Offline CudamanTom

  • Resident
  • *****
  • Posts: 2670
Re: Shaker bubble
« Reply #5 on: March 26, 2016 - 07:22:49 PM »
Too bad there isn't a clear resin shaker. That would be cool.  :2thumbs:
1971 Cuda Vert 440-833 - (clone)
1971 Cuda 440-727 - (clone)


Because I like it fast!!!

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Re: Shaker bubble
« Reply #6 on: March 26, 2016 - 10:04:11 PM »
I have a large picture of my engine without the shaker that I carry with me, just in case.  :D

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Shaker bubble
« Reply #7 on: March 30, 2016 - 10:08:45 AM »
I would not do it , some ass will drop a nut down the carbs

Challenger - You`ll wish You Hadn`t

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Shaker bubble
« Reply #8 on: March 31, 2016 - 10:14:35 AM »
I would not do it , some ass will drop a nut down the carbs

That was my first thought as well . . I worry about even opening my hood these days . .  Certainly won't leave it open if I am not there with my car.  Remember at a Nats show . . . Someone going around just taking parts off people's cars!  Took some thing off the car right next to mine . . .  :screwy:

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: Shaker bubble
« Reply #9 on: March 31, 2016 - 11:15:18 AM »
I agree, I would not leave my carbs open at a show, people are just idiots and think it will be funny to drop something in there. Also, I think the shaker is the attention getter; sure the carbs and engine look nice, but I think the shaker looks as nice, plus it one less thing laying around for someone to steal.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline onebadfish

  • Jr. Member
  • **
  • Posts: 404
Re: Shaker bubble
« Reply #10 on: April 01, 2016 - 05:18:43 AM »
I was just in a car show. I spent a lot of money restoring my carbs to look like new. My buddy was telling me to take off the bubble but I just couldn't do it for fear of some IDIOT tossing something in there. But I agree that the bubble looks great but so does that new engine too! Too bad that damn thing is a pain to remove and worse to install.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Shaker bubble
« Reply #11 on: April 02, 2016 - 12:40:13 PM »
That was my first thought as well . . I worry about even opening my hood these days . .  Certainly won't leave it open if I am not there with my car.  Remember at a Nats show . . . Someone going around just taking parts off people's cars!  Took some thing off the car right next to mine . . .  :screwy:
& you didn't stop them ?
 I guess you were not htere & found out later

Challenger - You`ll wish You Hadn`t

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Shaker bubble
« Reply #12 on: April 03, 2016 - 11:01:39 PM »
& you didn't stop them ?
 I guess you were not htere & found out later

Yeah I had to run back to the hotel for a minute and left my golf cart in my spot . . . Got back and just pulled in when the owner next to me came back to his car and started screaming!  I think they caught the person later taking something off another car . . . Still made me think how trusting we can be at a show . . . . The normal person would go by and just think it is the thiefs car and he is working on it? 

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Shaker bubble
« Reply #13 on: April 04, 2016 - 12:51:20 AM »
Sad

Challenger - You`ll wish You Hadn`t

Offline 74 challenge

  • Sr. Member
  • ****
  • Posts: 1247
Re: Shaker bubble
« Reply #14 on: April 04, 2016 - 08:39:25 AM »
My uncle caught a guy taking his rad cap at a car show.

Are they worth a lot on the black market? why would you do that?
1-8-4-3-6-5-7-2