Author Topic: Preserving door VIN Label (Read 3403 times)

EbodyMod · « **on:** March 27, 2016 - 11:19:44 AM »

What is the best way to preserve door VIN labels? I am :clueless:getting ready to spray primer and wondering if i should tape it off or try to remove it and save it. What do you guys do to save them? after finding out i destroyed the cowl vin i am not losing any more numbers if i can help it.

anlauto · « **Reply #1 on:** March 27, 2016 - 11:43:37 AM »

You would have to tape it over. There's no way to remove it and save it.

I replace all the ones on the cars I restore. Reproductions are available from our friends at ECS.

rUNCHARGER · « **Reply #2 on:** March 27, 2016 - 11:49:52 AM »

If you try to pull it, you will destroy it. I have never had any luck taping one off. New ones from ECS look great.

Sheldon

'Cuda Hunter · « **Reply #3 on:** March 27, 2016 - 12:10:27 PM »

How did you ruin your cowl vin?

EbodyMod · « **Reply #4 on:** March 27, 2016 - 08:45:54 PM »

It was lost when I changed the upper cowl. I did not realize at the time there was one there. OOOPs! Dose ECS have a website?

anlauto · « **Reply #5 on:** March 27, 2016 - 08:47:12 PM »

http://www.ecsautomotive.com/

EbodyMod · « **Reply #6 on:** March 27, 2016 - 08:49:06 PM »

Thx you guys are the best!!!

EbodyMod · « **Reply #7 on:** March 27, 2016 - 09:05:58 PM »

Holt Sh&*, those guys have some awesome stuff.

Finoke · « **Reply #8 on:** March 28, 2016 - 07:41:29 AM »

Quote from: anlauto on March 27, 2016 - 11:43:37 AM

You would have to tape it over. There's no way to remove it and save it.

I replace all the ones on the cars I restore. Reproductions are available from our friends at ECS.

If you do decide to tape over it, don't let the tape actually touch it. Cut a piece of paper the size of the sticker then tape the paper over it with only a small tape edge holding the paper in place.

EbodyMod · « **Reply #9 on:** March 28, 2016 - 02:13:54 PM »

After looking at ESC site I am definitely going to order one from them. One more newbie dumb question for you guys. When you send your dash pad in to be refurbished how do you address the VIN plate?

HP_Cuda · « **Reply #10 on:** March 28, 2016 - 02:16:28 PM »

Take the plate off and buy new VIN plate rivets.

Unfortunately they are like 40 bucks to replace....maybe Alan knows a better place. Then again some folks just use round rivets and put the plate back on.

anlauto · « **Reply #11 on:** March 28, 2016 - 02:23:33 PM »

ECS sells the rivets and VIN tag logo transfer as a kit.

EbodyMod · « **Reply #12 on:** March 28, 2016 - 02:25:27 PM »

:wavingflag:Awesome. I did not see that last night....But then again I had my Jack Daniels Glasses on!!

HP_Cuda · « **Reply #13 on:** March 28, 2016 - 02:30:55 PM »

Dang they got cheaper!!!

Love them guys at ECS..

EB3-GranCoupe · « **Reply #14 on:** April 07, 2016 - 08:06:27 PM »

I had ECS reproduce my Door Sticker, and I got the rivets and dry rub "Chrysler Corporation" logo. A must have for sure.

Author Topic: Preserving door VIN Label (Read 3403 times)

EbodyMod

Preserving door VIN Label

anlauto

Re: Preserving door VIN Label

rUNCHARGER

Re: Preserving door VIN Label

'Cuda Hunter

Re: Preserving door VIN Label

EbodyMod

Re: Preserving door VIN Label

anlauto

Re: Preserving door VIN Label

EbodyMod

Re: Preserving door VIN Label

EbodyMod

Re: Preserving door VIN Label

Finoke

Re: Preserving door VIN Label

EbodyMod

Re: Preserving door VIN Label

HP_Cuda

Re: Preserving door VIN Label

anlauto

Re: Preserving door VIN Label

EbodyMod

Re: Preserving door VIN Label

HP_Cuda

Re: Preserving door VIN Label

EB3-GranCoupe

Re: Preserving door VIN Label