News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Window louvers touching rear window glass  (Read 1259 times)

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Window louvers touching rear window glass
    « on: May 23, 2016 - 04:52:23 PM »
    The underside rib on my rear window louvers are resting on my rear window in 1 spot. I've tried to fit them better but it's still running. With the pins in, they are tight but will this be an issue? Any suggestions? Thinking a piece of rubber on the rib that is rubbing?
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Window louvers touching rear window glass
    « Reply #1 on: May 25, 2016 - 09:17:10 PM »
    SO I assume this is an aftermarket repop ?
     the edges around the top & sides should have a rubber seal on them , the pins should hold them tight but it should never be touching on the glass !
    So you could trim the inside of the slat that is touching  , a die grinder would trim it quick
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Window louvers touching rear window glass
    « Reply #2 on: May 25, 2016 - 09:21:22 PM »
    Mine is close but not touching. It can with a rubber "gasket?" that rests on the glass, you could do the same thing with a slit rubber hose in a couple places.
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Re: Window louvers touching rear window glass
    « Reply #3 on: May 25, 2016 - 10:51:55 PM »
    Yea they are repops from dales. I've trimmed the underside but they keep touching the glass at some point or another. Don't want to trim anymore, getting a little close to the spot welds! I'm going to have to use a slit rubber hose.
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Window louvers touching rear window glass
    « Reply #4 on: May 26, 2016 - 12:02:49 AM »
    What about shimming up the hinges  1/8" Some aluminum sheet shaped like the hinge, then painted black? Just a thought?  :dunno:
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Re: Window louvers touching rear window glass
    « Reply #5 on: May 26, 2016 - 08:07:00 AM »
    Quote from: brads70 on May 26, 2016 - 12:02:49 AM
    What about shimming up the hinges  1/8" Some aluminum sheet shaped like the hinge, then painted black? Just a thought?  :dunno:

    The pins at the bottom side are up more than I'd like already, afraid if I shim the hinges then I won't be able to engage the pin.
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension

    Offline 1 Wild R/T

    • Resident
    • *****
    • Posts: 4594
    Re: Window louvers touching rear window glass
    « Reply #6 on: May 26, 2016 - 10:01:15 AM »
    My buddies T?A is an original louver car, he's owned it since the miid 70's, It;s always had a rubber strip on the center rib...
    Logged
    JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
    WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
    RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
    5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

    Offline YellowThumper

    • Sr. Member
    • ****
    • Posts: 1633
    • I left the snow for this?
    Re: Window louvers touching rear window glass
    « Reply #7 on: May 26, 2016 - 12:15:27 PM »
    Is your rear glass Oem or is it a replacement piece?
    If replacement it could have an incorrect curve to it.

    Just a thought...
    Logged
    Removing the warning labels one at a time.
    Nature will take care of the rest.

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Re: Window louvers touching rear window glass
    « Reply #8 on: May 26, 2016 - 01:04:03 PM »
    Quote from: YellowThumper on May 26, 2016 - 12:15:27 PM
    Is your rear glass Oem or is it a replacement piece?
    If replacement it could have an incorrect curve to it.

    Just a thought...

    Don't know...was in it when I got it. Going to add some rubber and forget about it  :cheers:
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension

    Offline YellowThumper

    • Sr. Member
    • ****
    • Posts: 1633
    • I left the snow for this?
    Re: Window louvers touching rear window glass
    « Reply #9 on: May 26, 2016 - 01:20:55 PM »
     :2thumbs:

    Quote from: dave73chally on May 26, 2016 - 01:04:03 PM
    Don't know...was in it when I got it. Going to add some rubber and forget about it  :cheers:
    Logged
    Removing the warning labels one at a time.
    Nature will take care of the rest.
    Pages: [1]
    « previous next »