69 Fastback G3 Hemi Father Son Project

[Cudaragtop]

Seats for the Barracuda
2004 Neon SRT4 Seats

[70chall440]

Same thing i put into my 73 Cuda, I like them.

[Cudaragtop]

Starting to look like a real car again.

[Cudaragtop]

Same thing i put into my 73 Cuda, I like them.

Yup, I really like how yours turned out.   
 A little bummed the harness pass through Bezels are discontinued. Looks like there are still fronts but the only backs are on ebay and listed for $170 each for just the back piece!
Dylan said these feel just like the $1200 a piece Recaro seats he sat in seat shopping on Friday.
Will eventually get them recovered in leather but for now they will do for fitting.

[70chall440]

I got my pass through bezels from Tasca parts, you have to know the part numbers. Not saying any are available, just that I was surprised to find some. If you put the part numbers into google perhaps there is something out there (I am sure I am not telling you anything you haven't tried).

What about something like this

https://www.utvdirect.com/dragonfire-harness-pass-through-bezel/?gclid=CjwKCAiAlO7uBRANEiwA_vXQ-8Tjtf7vzmNK_VKpniiSAlnM7tBKRHYBB_F2OvIUl2XIb8mbr-vESBoCaRsQAvD_BwE

[73440]

Starting to look like a real car again.

Did you make the cherry picker frame lift ?

[70chall440]

Outstanding Randy, I know its been a long trip, they always are. its looking really good.

[Cudaragtop]

Did you make the cherry picker frame lift ?

It is from US Car Tools
http://store.uscartool.com/uni-lift-unibody-front-end-lifting-tool.html

I am or have been using their K-Member Stand/Cart, Body Dolly Wheels, and the Unibody Front End Lifting Tool



On the car are complete USCT Replacement Core Support, Inner Fender Braces, Shock Tower Bracing, Front and Rear Torque Boxes and Sub-Frame Connectors.

All good stuff! 

They have gotten quite a bit of business from me. 

[Cudaragtop]

Outstanding Randy, I know its been a long trip, they always are. its looking really good.

Thanks Mike!
Little by little... 
Tried to find the ACR harness pass through bezels but they are discontinued and no longer available.
I found front half here and back half there and ordered both only to receive a refund and a sorry discontinued note...
May look at some aftermarket or other seat specific pass through bezels.

Polaris Razor harness pass through may work. $44 for a pair


The upholstery shop near me may have other alternatives as well.
https://www.nwcraftedinteriors.com/
https://www.facebook.com/nwcrafted/

Dropping off the Cuda off with them on Monday to have the seats redone.
Changing over to Leather
Have new foam and Leather from Legendary and new rear covers they will be doing.

Happy Thanksgiving!

[70chall440]

Randy - all that US tool stuff i cool, looked at their support pieces when I was doing the Cuda, but ended up making my own. That upholstery shop looks very good, they obviously know what they are doing. This car is going to be really nice.

[73440]

It is from US Car Tools
http://store.uscartool.com/uni-lift-unibody-front-end-lifting-tool.html

I am or have been using their K-Member Stand/Cart, Body Dolly Wheels, and the Unibody Front End Lifting Tool



On the car are complete USCT Replacement Core Support, Inner Fender Braces, Shock Tower Bracing, Front and Rear Torque Boxes and Sub-Frame Connectors.

All good stuff! 

They have gotten quite a bit of business from me. 

Thanks for the info.
The lift looks like a nice setup .
Yep, one day would like to make some purchases from US Car Tool .

[YellowThumper]

Been awhile since I looked into this build.
Very nice progress.

[Cudaragtop]

Ordered this Ididit Tilt column and EPAS Performance Electric Power Assisted Steering Kit for the Barracuda.
Have to figure out what steering wheel, adapter and horn button we want to use.
Need to get the seats located and mounted and figure out the correct location, length, angle, etc.
Neon SRT4 Seats need to have some modified brackets made up for them.
This is the Kit, Steering column and a YouTube video of an EPAS install in and early A-Body Barracuda.

www.youtu.be/YBYhsjo_zq4

[70chall440]

You are not messing around around you  very cool.

Reference the seats, I don't know about A body but for my Cuda I used the stock brackets/adjusters and made an adapter to marry them to the Neon seats.

[Cudaragtop]

Also decided to go with an 8HP70 8-speed automatic from a 6.4 2015 and up car
Sound German Automotive sells a controller kit for swaps.
Will need to cut the tunnel and torsion bar cross member to fit the 8HP70
Have a line on an HP70 and a shifter. Bought a SRT Challenger Console off ebay.




https://www.facebook.com/Sound-German-Automotive-213743525471191/

Sound German Automotive
POWERTRAIN CONTROL SOLUTIONS (PCS)
"Supporting 8hp swaps with the FCA units only. We support swaps with factory take out ECMs, crate motor ECMs, and full standalone conversions."

A picture from his facebook of a kit + optional Wireless Paddle Shifter 



8HP70  Photo off the web


US Car Tools sells a Tunnel Perimeter Frame Kit for HP70 swap into A-Body

http://store.uscartool.com/67-to-75-A-Body-Transmission-Tunnel-Perimeter-Frame_p_235.html