Author Topic: Small Block Shaker Intake Question (Read 3114 times)

daveh · « **on:** June 23, 2016 - 10:09:17 PM »

Hey guys,

Can those that have shaker cars with small blocks let me know what intake fits the best under your shaker to fit the hood properly? I want an aluminum intake not the original cast intake.

Thanks
Dave

scf100 · « **Reply #1 on:** July 01, 2017 - 08:38:57 PM »

No answers?

Racer57 · « **Reply #2 on:** July 01, 2017 - 10:48:15 PM »

I put an Eldebrock on my 383 that was basically a stock replacement and used a 1/2" heat spacer. You could use this one thats for small blocks ... http://www.edelbrock.com/automotive/mc/manifolds/chrysler/performer-sb.shtml

cam440 · « **Reply #3 on:** July 09, 2017 - 08:14:57 AM »

Mine 70 cuda with a 340 shaker has a air gap intake manifold I think it may sit a touch higher than stock but I'm pretty happy with it

76orangewagon · « **Reply #4 on:** July 10, 2017 - 08:17:02 PM »

I currently have an Edelbrock LD340 with a 1/2" carb spacer. I will be putting the correct 3512100 intake on my 71 when I restore it next year.

76orangewagon · « **Reply #5 on:** July 10, 2017 - 08:22:28 PM »

Here is the front and rear height of the factory intake that may help you when deciding.

Author Topic: Small Block Shaker Intake Question (Read 3114 times)

daveh

Small Block Shaker Intake Question

scf100

Re: Small Block Shaker Intake Question

Racer57

Re: Small Block Shaker Intake Question

cam440

Re: Small Block Shaker Intake Question

76orangewagon

Re: Small Block Shaker Intake Question

76orangewagon

Re: Small Block Shaker Intake Question