**SOLD** Cuda outer speaker grilles for 3 speaker dash

[roadrunninMark]

SOLD!!!!  I have a pair of outer speaker grilles for a 3 speaker dash, cuda. 1 B/L and 1 B/R. These are just the grilles, I don't have the bracketry for the underside. These are in good shape, just need cleaning up and repainting. $115 for the pair, including shipping to 48 states. Other shipping locations will be an additional charge, based on actual destination. Parts located in GA. Please PM or midairmark2@aol.com.

[JS27N0B]

I have a question, I'm not looking to purchase but am wondering if anybody knows if these fit the 71-74 Challengers as well seeing as all other dash items seem to be the same.
The reason for my question is I have a pair of mint J versions and wondering if they were 1970 only. Sorry to hijack. 😀

[1 Wild R/T]

I have a question, I'm not looking to purchase but am wondering if anybody knows if these fit the 71-74 Challengers as well seeing as all other dash items seem to be the same.
The reason for my question is I have a pair of mint J versions and wondering if they were 1970 only. Sorry to hijack. 😀

J/R & J/L are 70 only, Challenger only.....  B/R & B/L fit 70-74 Barracuda & 71-74 Challenger..

[anlauto]

J/R & J/L are 70 only, Challenger only.....  B/R & B/L fit 70-74 Barracuda & 71-74 Challenger..

I've heard this over and over again.....and then again.....but I just installed a set of B's on an original 70 Challenger pad and I can't tell the difference

[Katfish]

Good info, I have a set, need to check the numbers.

[JS27N0B]

J/R & J/L are 70 only, Challenger only.....  B/R & B/L fit 70-74 Barracuda & 71-74 Challenger..

Thought as much, just never confirmed it with a later parts catalogue. Thanks!👍🏻

[JS27N0B]

I've heard this over and over again.....and then again.....but I just installed a set of B's on an original 70 Challenger pad and I can't tell the difference

Must have been different part numbers for a reason.🤔

[1 Wild R/T]

The J grilles have a more pronounced curve toward the front... B grilles will leave a minor gap in the tightest curve & compress the foam in the middle area....

Alan, on the 70 Dash you put the B grilles on was it an original 70 pad or a reproduction pad? Cause the reproductions aren't even close to accurate...

[anlauto]

Original pad. I'll take a closer look for "gaps"