1970 Big Block A/C parts NEEDED....

[anlauto]

I'm looking for some correct 1970 383 E Body A/C under hood parts. Hard lines, hoses, brackets etc....
Anybody got stuff they're not going to use ?

Contact Alan at anlauto@hotmail.com or PM me here.

[1 Wild R/T]

Brackets are easy... 69-71 Big Block B/C/E body all the same...
Condenser, Steel line from Condenser to Dryer, Dryer, Dryer Mounting Bracket, line from Dryer to Expansion Valve & Expansion Valve Are all pretty 1970 Big Block or Small Block E body.....  The two lines to the compressor are somewhat harder 70-71 Big Block E body or 71 Big Block B body....

You could easily fake the line from the compressor to the condenser with a small block line, the steel part is the same, the rubber hose is about 1" longer on a small block line....    Line from the evaporator to compressor is tougher, it's visually unique & kinda hard to find....

Good Luck!

[anlauto]

Brackets are easy... 69-71 Big Block B/C/E body all the same...
Condenser, Steel line from Condenser to Dryer, Dryer, Dryer Mounting Bracket, line from Dryer to Expansion Valve & Expansion Valve Are all pretty 1970 Big Block or Small Block E body.....  The two lines to the compressor are somewhat harder 70-71 Big Block E body or 71 Big Block B body....

You could easily fake the line from the compressor to the condenser with a small block line, the steel part is the same, the rubber hose is about 1" longer on a small block line....    Line from the evaporator to compressor is tougher, it's visually unique & kinda hard to find....

Good Luck!

Thanks...actually the 383 bracket that I need is different from the 440 one...I just learned that.
To make matters worse..I have one set of lines for one car and I want to find the exact same lines for it's sequential brother... 

[1 Wild R/T]

Thanks...actually the 383 bracket that I need is different from the 440 one...I just learned that.
To make matters worse..I have one set of lines for one car and I want to find the exact same lines for it's sequential brother... 

Yes, the rear support brackets are all low deck/tall deck specific...