Headlight bracket bolt to support needed

[Topcat]

Anyone know what are the correct bolts that go to the radiator support?
One bolt would go through to behind the wiper washer plastic tank.

[Topcat]

If you have a 71' Cuda and it's original, please send me a PM regarding this bolt.

I haven't been able to locate it on R/T Specialties.
Maybe just need the right search words on their site.

[BIGSHCLUNK]

Mike, I will gladly look in MOPARALLEY at the shop. Maybe one of my relics had the right bolt?? Need a pic or something tho.... 

[Topcat]

Mike, I will gladly look in MOPARALLEY at the shop. Maybe one of my relics had the right bolt?? Need a pic or something tho.... 

Take a look at the picture I posted on my first post.

There's a hole on top of the radiator support.

Below that hole, there's another hole.
It's where the headlight bracket bolts to the the radaiator support.

[BIGSHCLUNK]

Is there a comparison on the other side?

[Topcat]

Is there a comparison on the other side?

No.

I remember it was a big washer fixed. Just can't remember what size it was.

I need both sides done

[BIGSHCLUNK]

Mike , something like... this??  Or that??

[Topcat]

I think it was a bigger washer?   

Isn't anyone here with a 71' Cuda have a picture of them they know are correct on their car?

[mopar jack]

My car is a 71 Barracuda but bolts should be the same. The brackets on both sides have this bolt and nut.

[mopar jack]

another pic.

[Topcat]

My car is a 71 Barracuda but bolts should be the same. The brackets on both sides have this bolt and nut.

Yup,

That's it!   

I recognize the oversize washer from memory.

[Topcat]

Anyone have those? And the nuts?
Or who carries them?

[sprecks]

If Mopar Jack can give us some critical dimensions I probably have some.  I'd guess it is a 5/16 bolt,  what is the length of the bolt and what is the diameter of the washer?  I recognize the nut.

[BIGSHCLUNK]

Agreed, the nut looks fairly common

[AARTA340]

Hard to tell in the picture, but it sure looks like a 1/4-20 bolt and nut. The small bracket does not warrant a 5/16 bolt. The 1/4 20 is more than enough to hold the headlight bracket to the core support.