Needed: OEM/ Original 440 Oil Dipstick and Tube

[cv70chall]

Finally had it with chrome crap....I am going back to original on my engine so I don't have to keep wrestling with leaks.
Looking for an original 440 dipstick and tube- in good condition.
Not worried about finish, as I will clean and re-paint if needed.

I just want something that will go in, work and not leak.

Thanks

[anlauto]

They do make a reproduction of the factory steel ones.

[cv70chall]

Any brand/ dealer in particular?

[73440]

I just bought one from Roseville recently, I had snapped the tube when replacing the motor mount.

[timbbuc2]

I bought a set from Year one but not installed yet

[mopardave]

http://www.rosevillemoparts.com/product_info.php/big-block-b-rb-383-400-413-426-wedge-/oiling-/p/70-71-383-440-b-e-dip-stick-and-tube-with-short-handle-oem-corre/cPath/166_180/products_id/9618

[dfrazz]

I went with this one from Mancini has it has some flex when dealing with headers, wires, etc.  http://www.manciniracing.com/milbrbhemcen.html

[73440]

I went with this one from Mancini has it has some flex when dealing with headers, wires, etc.  http://www.manciniracing.com/milbrbhemcen.html

I can definetly see a use for that Milodon one , I bought the 2058 from Roseville recently.

[timbbuc2]

My mistake, went through my files my I bought the dip stick for the oil and tranny from Roseville, look very nice, but I did not order the o ring , my mistake, I thought maybe it would come with it

[cv70chall]

WTF?
So they don't include the o-ring for a $55 dip stick and tube?
do you have the part number- as I will need to order it before I install it.

Geez.... Never a dull moment!

[mopardave]

Should have been with or on the Tube. These are supplied to us from AA ,

[cv70chall]

Got the dipstick tube in- after having to lightly file the end to a slight bevel...Placing it in the freezer did nothing to help us...
Anyway, it's in- snug- and not leaking like the Good 'Ol Chinese aftermarket one.