Author Topic: Adjusting hood  (Read 718 times)

Offline dave73chally

  • Sr. Member
  • ****
  • Posts: 1304
Adjusting hood
« on: October 01, 2016 - 04:15:40 PM »
Hood fit good before I removed it but forgot to mark how the hinges were set. The passenger side near the cowl is below the fender line. The hinge at the inner fender cannot move down any lower. How do I adjust it?
73 Challenger
512 / 4spd / Hotchkis & QA1 Suspension




Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Adjusting hood
« Reply #1 on: October 01, 2016 - 04:23:44 PM »
Confused a bit...The hood is low at the cowl, and the hinge can't go lower ? :clueless: Wouldn't you want it hinge to go higher ?
« Last Edit: October 02, 2016 - 10:06:16 PM by anlauto »
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Adjusting hood
« Reply #2 on: October 02, 2016 - 09:52:23 PM »
twist the hinge if it sits low loosen the hinge bolts raise the rear of the hinge

Challenger - You`ll wish You Hadn`t

Offline dave73chally

  • Sr. Member
  • ****
  • Posts: 1304
Re: Adjusting hood
« Reply #3 on: October 03, 2016 - 09:26:43 AM »
twist the hinge if it sits low loosen the hinge bolts raise the rear of the hinge

Yup, that worked. Thanks  :thumbsup:
73 Challenger
512 / 4spd / Hotchkis & QA1 Suspension